Pioneer VSX-521 Manuel d'utilisateur télécharger pdf (Page 33)

The System Setup menu

Adjust the level of each channel using

/

If you selected Manual, use / to switch speakers. The

Auto setup will output test tones in the order shown on-

screen:

Adjust the level of each speaker as the test tone is emitted.

Note

• If you are using a Sound Pressure Level (SPL) meter, take

the readings from your main listening position and adjust

the level of each speaker to 75 dB SPL (C-weighting/slow

reading).

• The subwoofer test tone is output at low volumes. You

may need to adjust the level after testing with an actual

soundtrack.

When you’re finished, press RETURN.

You return to the Manual SP Setup menu.

Tip

• You can change the channel levels at any time by press

, then press CH SELECT and LEV +/– on the

remote control. You can also press CH SELECT and use

/ to select the channel, and then use / to adjust

the channel levels.

Speaker Distance

For good sound depth and separation from your system, you

need to specify the distance of your speakers from the

listening position. The receiver can then add the proper delay

needed for effective surround sound.

Select ‘Manual SP Setup’ from the System Setup menu.

Select ‘Speaker Distance’ from the Manual SP Setup

menu.

Adjust the distance of each speaker using

/

You can adjust the distance of each speaker in 0.1 m

increments.

When you’re finished, press RETURN.

You return to the Manual SP Setup menu.

The Input Assign menu

You only need to make settings in the Input Assign menu if

you didn’t hook up your equipment according to the default

settings for the component video inputs.

• Default settings:

Component-1: DVD

Component-2: DVR (DVR/BDR)

Important

• If you connect any source component to the receiver

using a component video input, you should also have your

TV connected to this receiver’s COMPONENT VIDEO

MONITOR OUT output (down converting component

video is not possible after assigning an input).

If you didn’t make component video connections according

to the defaults above, you must assign the numbered input to

the component you’ve connected (or else you may see the

video signal of a different component). For more on this, see

Using the component video jacks on page 16.

Select ‘Input Assign’ from the System Setup menu.

Select ‘Component Input’ from the Input Assign menu.

Select the number of the component video input to

which you’ve connected your video component.

The numbers correspond with the numbers beside the inputs

on the rear of the receiver.

Select the component that corresponds with the one

you connected to that input.

Select between BD, DVD, TV (TV/SAT), DVR (DVR/BDR) or

OFF.

•Use / and ENTER to do this.

• If you assign a component input to a certain function, any

component inputs previously assigned to that function

will automatically be switched off.

• Make sure you have connected the audio from the

component to the corresponding inputs on the rear of the

receiver.

When you’re finished, press RETURN.

You return to the Input Assign menu.

• For the assignment of the digital signal inputs, see

Selecting the audio input signal on page 21.

2c.Channel Level

Front L

Center

Front R

Surround R

Surr. Back R

Surr. Back L

Surround L

Subwoofer

Return

[ 0dB]

[ ––– ]

[ 0dB]

0dB

RECEIVER

2.Manual SP Setup

Return

a.Speaker Setting

b.Crossover Network

c.Channel Level

d.Speaker Distance

2d.Speaker Distance

Front L

Center

Front R

Surround R

Surr. Back R

Surr. Back L

Surround L

Subwoofer

Return

3.0 m

[ 3.0 m ]

[ –––– ]

[ 3.0 m ]

System Setup

1 . Auto MCACC

2 . Manual SP Setup

3 . Input Assign

4 . Pre Out Setting

5 . HDMI Setup

6 . Auto Power Down

7 . FL Demo Mode

Return

3.Input Assign

Return

a.Component Input

3a.Component Input

Return

Component–1

DVD

Component–2 [ DVR ]

VSX-521_SYXCN_En.book 33 ページ２０１１年２月９日　水曜日　午後４時６分

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 39 40

Commentaires sur ces manuels

Pas de commentaire

Pioneer VSX-521 Manuel d'utilisateur Page 33

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Pioneer VSX-521