Pioneer SC-LX77-K Manuel d'utilisateur Page 81
- Page / 139
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
81
09
Using other functions
ZONE 2 remote controls
Press the remote control’s ZONE 2 to operate the corresponding zone.
The following table shows the possible ZONE 2 remote controls:
Button(s) What it does
u
Switches on/off power in the sub zone.
INPUT SELECT
Use to select the input function in the sub zone.
Input function buttons
Use to select the input function directly (this may not work for some functions) in the sub
zone.
VOLUME +/–
<a>
Use to set the listening volume in the sub zone.
MUTE
<a>
Mutes the sound or restores the sound if it has been muted (adjusting the volume also
restores the sound).
a ! The volume cannot be adjusted on the receiver if Volume Level at ZONE 2 Setup under ZONE Setup is set to –40 dB Fixed
or 0 dB Fixed.
ZONE 3 remote controls
Press the remote control’s ZONE 3 to operate the corresponding zone.
The following table shows the possible ZONE 3 remote controls:
Button(s) What it does
u
Switches on/off power in the sub zone.
INPUT SELECT
Use to select the input function in the sub zone.
Input function buttons
Use to select the input function directly (this may not work for some functions) in the sub
zone.
VOLUME +/–
<a>
Use to set the listening volume in the sub zone.
MUTE
<a>
Mutes the sound or restores the sound if it has been muted (adjusting the volume also
restores the sound).
a ! The volume cannot be adjusted on the receiver if Volume Level at ZONE 3 Setup under ZONE Setup is set to –40 dB Fixed
or 0 dB Fixed.
HDZONE remote controls
Press the remote control’s HDZONE to operate the corresponding zone.
The following table shows the possible HDZONE remote controls:
Button(s) What it does
u
Switches on/off power in the HDZONE.
INPUT SELECT
Use to select the input function in the HDZONE.
Input function buttons
Use to select the input function directly (this may not work for some functions) in the
HDZONE.
Note
The VOLUME +/– and MUTE buttons cannot be operated for HDZONE.
Making an audio or a video recording
You can make an audio or a video recording from the built-in tuner, or from an audio or video source connected to
the receiver (such as a CD player or TV).
Keep in mind you can’t make a digital recording from an analog source or vice-versa, so make sure the compo-
nents you are recording to/from are hooked up in the same way (see Connecting your equipment on page 18 for
more on connections).
! The receiver’s volume, Audio parameters (the tone controls, for example), and surround effects have no effect
on the recorded signal.
! Some digital sources are copy-protected, and can only be recorded in analog.
! Some video sources are copy-protected. These cannot be recorded.
Since the video converter is not available when making recordings (from the video OUT jacks) make sure to use
the same type of video cable for connecting your recorder as you used to connect your video source (the one you
want to record) to this receiver. For example, you must connect your recorder using Component video if your
source has also been connected using Component video.
1 Select the source you want to record.
Use the input function buttons (or INPUT SELECT).
2 Prepare the source you want to record.
Tune to the radio station, load the CD, video, DVD etc.
3 Select the input signal according to the signal to be recorded.
Use the remote control’s SIGNAL SEL button.
4 Prepare the recorder.
Insert a blank tape, MD, video etc. into the recording device and set the recording levels. Refer to the instructions
that came with the recorder if you are unsure how to do this. Most video recorders set the audio recording level
automatically-check the component’s instruction manual if you’re unsure.
5 Start recording, then start playback of the source component.
Network settings from a web browser
Network settings can be made using the browser on a computer connected to the same LAN as the receiver.
1 Press u STANDBY/ON to switch on the receiver.
2 Turn on the computer’s power and launch the Internet browser.
3 Input the receiver’s IP address into the browser’s address input field.
Access the IP address“http://(the receiver’s IP address)” from a web browser. Check the receiver’s IP address at
Checking the Network Information on page 104.
When connected with the receiver, the Web Control screen appears in the browser.
4 When the Web Control screen appears, select the item you want to set.
- SC-LX77-K/-S 1
- SC-LX87-K/-S 1
- K058a_A1_En 2
- Contents 3
- 11 The Advanced MCACC menu 4
- 14 Additional information 4
- Important 5
- Checking what’s in the box 7
- Our philosophy 7
- Features 7
- Installing the receiver 9
- Loading the batteries 9
- Before you start 10
- Controls and displays 11
- Front panel 15
- Connecting your equipment 17
- Rear panel 18
- Placing the speakers 22
- Connecting the speakers 22
- Bi-amp compatible speaker 25
- Front right 25
- Front left 25
- About the audio connection 29
- Video signals 30
- Select one 33
- HDMI/DVI-compatible monitor 34
- CD player, MD, DAT, etc 35
- Turntable 35
- DVD player, etc 36
- 75 Ω coaxial cable 37
- Outdoor antenna 37
- Indoor antenna 37
- (vinyl-coated wire) 37
- 5 m to 6 m 37
- AUDIO IN 38
- LINE LEVEL 38
- VIDEO IN 38
- Sub zone (ZONE 2) Main zone 39
- Sub zone (ZONE 3) Main zone 39
- Bluetooth® ADAPTER 41
- Connecting a USB device 42
- Connecting to a wireless LAN 43
- Connecting an IR receiver 43
- Plugging in the receiver 44
- Basic Setup 45
- SC-LX87 SC-LX77 46
- The Input Setup menu 47
- Operation Mode Setup 48
- About the Home Menu 49
- Basic playback 50
- AUTO/ALC/ 51
- DIRECT 51
- STANDARDADV SURR 51
- Playing an iPod 52
- ENTER, d 53
- Playing music from a computer 55
- Listening to the radio 55
- Listening to your system 59
- Selecting MCACC presets 62
- Choosing the input signal 62
- Introduction 66
- About HTC Connect 67
- Basic playback controls 67
- About network playback 69
- About playable file formats 70
- Control with HDMI function 71
- HDMI Setup 72
- Before using synchronization 73
- About synchronized operations 73
- Setting the PQLS function 73
- Using other functions 75
- Setting the Audio options 76
- Setting the Video options 78
- Using the MULTI-ZONE controls 80
- Using the sleep timer 82
- Dimming the display 82
- Switching the HDMI output 82
- Checking your system settings 82
- Resetting the system 83
- ALL ZONE STBY 85
- DISCRETE ON 85
- This receiver’s 86
- Other remote 86
- Direct function 87
- Setting the backlight mode 87
- (Discrete On) functions 87
- Controlling components 88
- TV and Audio/Video components 89
- Audio/Video components 89
- TV (Projector) 90
- The Advanced MCACC menu 91
- Automatic MCACC (Expert) 92
- Manual MCACC setup 94
- Checking MCACC Data 97
- Data Management 98
- Manual speaker setup 100
- Speaker Setting 101
- Channel Level 101
- Speaker Distance 102
- THX Audio Setting 102
- Network Setup menu 103
- The Other Setup menu 104
- Volume Setup 105
- Remote Control Mode Setup 105
- Software Update 105
- ZONE Setup 106
- On Screen Display Setup 106
- MHL Setup 107
- Troubleshooting 111
- No sound 111
- Other audio problems 112
- ADAPTER PORT terminal 113
- Settings 114
- Remote control 115
- AVNavigator 116
- USB interface 117
- Web Control 118
- Wireless LAN 119
- Additional information 120
- Surround sound formats 121
- About THX 121
- About HDMI 122
- HTC Connect 122
- About iPod 123
- Windows 8 123
- Software license notice 123
- Speaker Setting Guide 124
- Cleaning the unit 126
- Glossary 129
- Features index 132
- Specifications 133
- Preset code list 134
- © 2013 PIONEER CORPORATION 139
- All rights reserved 139
- <ARB7500-A> 139
Produits connexes et manuels pour Systèmes de cinéma à domicile Pioneer SC-LX77-K
(2 pages)
(44 pages)© 2020, manymanuals.fr. Tous droits réservés | 1.189 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels