Pioneer PDP-505HDE Manuel d'utilisateur télécharger pdf (Page 45)

12Enjoying through External Equipment

English

Item Description

Auto Automatically identifies input audio

(factory default) signals.

Digital Accepts digital audio signals.

Analogue Accepts analogue audio signals.

Press HOME MENU to exit the menu.

• If no sound is output, specify another audio signal type.

• For the audio signal types to be specified, check the

operation manual that came with the connected equip-

ment.

• Depending on the equipment to be connected, you also

need to connect analogue audio cables.

Using HDMI Input

The INPUT 3 terminals include HDMI terminals to which

digital video and audio signals can be input. To use the HDMI

terminal, activate the terminal and specify the types of video

and audio signals to be received from the connected equip-

ment. For the types of these signals, see the operation

manual that came with the connected equipment.

Before starting the menu, press INPUT 3 on the remote

control unit or press INPUT on the Plasma Display to select

INPUT 3.

Input signal correlation table

1920

∗

1080i@50Hz

720

∗

576p@50Hz

128 0

∗

720p@50Hz

720(1440)

∗

576i@50Hz

1920

∗

1080i@59.94/60Hz

720

∗

480p@59.94/60Hz

128 0

∗

720p@59.94/60Hz

720(1440)

∗

480i@59.94/60Hz

• PC signals are out of correspondence.

Connecting HDMI equipment

To specify the type of digital video signals:

Repeat steps 1 to 3 provided To activate the HDMI

terminal.

Select “Video” ( / then ENTER).

Select the type of digital video signals ( / then

ENTER).

• If you select “Auto”, an attempt will be made to

identify the type of digital video signals when digital

video signals are received.

Item Description

Auto Automatically identifies input digital video

(factory default) signals.

Colour-1 Digital Component Video signals (4:2:2)

locked

Colour-2 Digital Component Video signals (4:4:4)

locked

Colour-3 Digital RGB signals locked

Press HOME MENU to exit the menu.

• If you select a parameter other than “Auto”, make such a

setting that results in natural colour.

• If no image appears, specify another digital video signal

type.

• For the digital video signal types to be specified, check the

operation manual that came with the connected equip-

ment.

To specify the type of audio signals:

Repeat steps 1 to 3 provided To activate the HDMI

terminal.

Select “Audio” ( / then ENTER).

Select the type of audio signals ( / then ENTER).

• If you select “Auto”, an attempt will be made to

identify the type of audio signals when audio signals

are received.

Media Receiver (rear view)

To activate the HDMI terminal:

Press HOME MENU.

Select “Option” ( / then ENTER).

Select “HDMI Input” ( / then ENTER).

Select “Setting” ( / then ENTER).

Select “Enable” ( / then ENTER).

Item Description

Disable Deactivates the HDMI terminal.

(factory default)

Enable Activates the HDMI terminal.

Press HOME MENU to exit the menu.

SERVICE ONLY

i / o link.A

SELECT

INPUT

INPUT 2

INPUT 1

OUT

CONTROL

INPUT 3

OPTICAL

ANT

(DIGITAL)

DIGITAL OUT

COMMON INTERFACE

SUB WOOFER

OUTPUT

INPUT 2

COMPONENT VIDEO

MONITOR

OUTPUT

R-AUDIO-L

S-VIDEO

VIDEO

OUT IN

HDMI

INPUT 3

HDMI cable

(commercially

available.)

SCART cable

(commercially available.)

Connect the SCART cable only

when inputting analogue audio

signals.

HDMI equipment

PDP-505XDE-Eng (44-47) 04.6.15, 1:14 PM45

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 175 176

Commentaires sur ces manuels

Pas de commentaire

Pioneer PDP-505HDE Manuel d'utilisateur Page 45

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Pioneer PDP-505HDE