Pioneer MJ-D508 Manuel d'utilisateur télécharger pdf (Page 34)

Copying Track Tracks

If you need to name several tracks with similar names—several parts of one suite, for example—^you can name the first one using

the procedure detailed above, then simply copy that name to the other tracks and edit them as required. This can save you a lot of

time over naming each track individually. The recorder stores the last three names you've copied using the name clip function in

its memory (up to 40 characters each). When you copy another track name, the oldest one is deleted from memory.

7 Go to the track with the name you want to copy.

❖ Use one of the usual methods—track skip, direct selection, etc.

2,6

Press NAME CLIP to copy the currently displayed

name into memory.

The display should confirm that the track name has been copied.

❖ You cannot copy the track names of playback-only discs.

Go to the track that you want to copy the

name to.

❖ Use one of the usual methods—track skip, direct selection, etc.

Press NAME to start editing the current track name.

Move the cursor to the position you want to insert

the copied name.

Use the ◄◄ and ►► buttons to move the cursor around the character

display.

Press NAME CLIP again.

The display flashes Name Insert briefly and the most recently clipped

name appears.

Use the jog dial to select one of the previous three

names stored, then press the jog dial (ENTER).

On the remote, use the and buttons to select a name, then

press ENTER.

The selected name is inserted at the point you chose.

Ctss3

......................

❖ Edit the name further if necessary.

8 Press NAME to leave the track name mode.

:PRB1285>

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 47 48

Pas de commentaire

Pioneer MJ-D508 Manuel d'utilisateur Page 34