Pioneer KRL-37V Manuel d'utilisateur télécharger pdf (Page 34)

The TV will automatically enter standby mode if no

operations are performed during the time span you set

(“30min.” or “3hr.”).

Five minutes before the TV enters standby mode, the

remaining time displays every minute in the lower-left

corner of the screen.

•

When set to “Yes”, the TV activates the following

power saving mode.

“RLS” set to “On” (Page 30).

“Standby Mode” set to “Mode2” (Page 38).

“No Signal Off” set to “Enable” (Page 31).

“No Operation Off” set to “3hr.” (Page 32).

•

Allows you to set a time when the TV automatically

enters standby mode.

NOTE

Select “Off” to cancel the sleep timer.

When the time has been set, countdown automatically

starts.

Five minutes before the preset of time expires, the

remaining time displays each minute in the lower-left corner

of the screen.

Channel Settings

Auto Installation

•

No Operation Off

Power Control

Ecology

Power Control

Sleep Timer

Power Control

Basic adjustment

Auto Installation

Setup

The TV automatically detects and stores all available

services in your area. This function also allows you to

perform the channel setting for digital and analogue

individually and reconfigure the settings after the initial

auto installation has been completed.

After selecting “Yes” on the screen, you can set

language and channel search the same as in the

initial auto installation. Follow steps 2, 4 and 5

on page 15.

NOTE

You cannot set the country setting in “Auto Installation” in

the “Setup” menu. If you want to reconfigure the country

setting, automatically execute initial auto installation after

executing “Reset” from the “Setup” menu.

The current country setting is displayed on the screen.

•

Programme Setup

Setup

Digital Setting

You can reconfigure the DTV service settings

automatically or manually.

Additional Search

Use this menu to add new services automatically after

auto installation has been completed.

Manual Search

Add new services within a specified frequency band.

Enter the frequency using 0–9 numeric buttons.

You can perform “Manual Search” with a service number

only when the five Nordic countries have been selected in

the country setting.

Manual Adjust

Configure various settings for each service using the

Colour (Red/Green/Yellow/Blue) buttons.

DTV 993

Service

No.

Old

LCN

EPG

Skip

Lock

Service

Name

SIT 3

DTV 994 ✔ ✔ SIT 2

DTV 995 ✔ SIT 1

DTV 999 HD Monosco

: Lock : CH Skip : EPG Skip : Sort

Press a/b to select the desired service.

Press the colour button on the remote control unit

corresponding with the item you want to reconfigure.

The ✔ mark indicates the operation is set to on. Each

time the colour button is pressed, you can switch the

corresponding operation on/off.

•

Digital channel settings

Buttons for Manual Adjust operation

Lock: Press Red button.

When the service is locked, you must enter your PIN

whenever you tune to the service.

CH Skip: Press Green button.

Services with a ✔ mark are passed over when pressing

Pe/f on the TV or remote control unit.

EPG Skip: Press Yellow button.

Services with a ✔ mark are passed over in the Electronic

Programme Guide (EPG).

Sort: Press Blue button.

The item position of services can be sorted.

Press a/b to select the service whose item

position you want to move, and then press ENTER.

DTV 994 ✔ ✔ SIT 2

DTV 995 ✔ SIT 1

Press a/b to move it to the desired position,

and then press ENTER.

DTV 994

✔✔

SIT 1

DTV 995

✔

SIT 2

Repeat steps 1 and 2 until all desired service

items are sorted.

KRL3237V_GB.indd 32KRL3237V_GB.indd 32 2008/06/13 14:50:252008/06/13 14:50:25

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 337 338

Commentaires sur ces manuels

Pas de commentaire

Pioneer KRL-37V Manuel d'utilisateur Page 34

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Pioneer KRL-37V