Pioneer DVR-540HX-S Manuel d'utilisateur télécharger pdf (Page 66)

Recording

07

66

En

Setting a timer recording

Using the timer recording features you can

program up to 32 timer recordings up to a

month in advance. Timer recording programs

can be set to record just once, every day, or

every week.

You can set the recording quality for your timer

recording in the same way as for a regular

recording, but with the added option of an

AUTO

mode, which maximizes the recording

quality for the space available on the disc (if

recording to DVD), or to fit on to a blank DVD

disc (if recording to HDD).

You can set timer recordings to record to a

recordable DVD or to the hard disk drive. For

regular (daily or weekly) HDD timer recordings

that you don’t need to keep, you can use the

Auto Replace Recording feature to

automatically replace the previous timer

recording with the new one. Note that when you

use this feature, the previous recording made

on that timer program will be replaced by the

next one, regardless of whether you have

watched it yet or not.

You can also set the recorder so that it will

adjust the recording quality to try and fit the

recording on to the disc if it would not

otherwise fit at the recording quality you set

(see

Optimized Rec

on page 130 for more on

this).

Finally, if you set a timer recording to record to

DVD but there isn’t a recordable DVD loaded at

the time of the recording, the Recovery

Recording feature will automatically record the

program to the HDD for you.

This recorder is compatible with VPS (Video

Programming System) and PDC (Program

Delivery Control) systems used by many analog

TV stations to ensure that a timer recording

catches the whole program even when the

program is not running to schedule. Up to eight

timer programs can be set with VPS/PDC on.

Important

•A timer recording can’t be set if there are

already 32 timer programs waiting to be

recorded.

• Timer recording will not start if:

– The recorder is already recording.

– A disc is being initialized, finalized or

unfinalized.

• Timer recording will start when the

operation preventing timer recording has

finished.

• The timer indicator ( ) lights in the front

panel display when the timer is active. If the

indicator is blinking it means that (for a

DVD timer recording) there is no disc

loaded, or the disc loaded is not recordable

(for an HDD timer recording it means that

the HDD is not recordable).

• Approximately two minutes before a timer

recording is set to start, the recorder will go

into timer recording standby. In timer

recording standby you cannot use some

functions.

• The maximum length for timer recordings

made to the HDD is 24 hours. However,

because one title (HDD) is limited to 12

hours, recordings over 12 hours will be

spread over two titles. Note that there will

be a break in the recording of a few

seconds between titles.

• VPS/PDC works only with analog stations;

it does not work with digital TV stations.

• VPS/PDC may not work with all broadcast

stations in your country/area. Check with

the stations for compatibility.

• The hours between 3:00 and 5:00 in the

morning are used by the GUIDE Plus+

system to download program information.

During these times, VPS/PDC may not

work reliably; leave VPS/PDC off if you set a

timer recording for these times.

A L L

DVR540HXS_WV_EN.book 66 ページ２００６年３月３０日　木曜日　午後１２時３８分

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 151 152

Commentaires sur ces manuels

Pas de commentaire