Pioneer DV-320-S Manuel d'utilisateur télécharger pdf (Page 31)

Section

English

Changing the Settings (Initial Settings)

Options settings Settings

Component Out

Progressive

Select this when a TV or projector supporting progressive video

signals is connected to the COMPONENT VIDEO OUT terminals.

PRGSVE appears on the front panel display.

Interlace

Select this when a TV or projector that does not support progres-

sive video signals is connected to the COMPONENT VIDEO OUT

terminals.

 When Progressive is selected and ENTER is pressed, a confirmation message appears. To change the setting,

select Yes then press ENTER. If you do not want to change the setting, select No then press ENTER.

 The picture may be disturbed when switching between Progressive and Interlace.

 When HDMI Resolution is set to 720x480i/720x576i, Interlace is set (DV-420V only).

 If the picture no longer appears after changing the setting to Progressive, set it back to Interlace. For instruc-

tions on how to do so, see Setting the Component Out and HDMI Resolution settings back to their defaults on

page 28.

AV Connector Out

Video

Regular video signals (composite) are output.

RGB

Select this when connected to a TV compatible with RGB video

signals. Note, however, that no video signals are output from the

composite video output terminals when set to RGB.

HDMI Resolution

(DV-420V only)

720x480i/

720x576i

720 x 480 pixel (NTSC)/

720 x 576 pixel (PAL) interlaced images are

output.

720x480p/

720x576p

720 x 480 pixel (NTSC)/

720 x 576 pixel (PAL) progressive images

are output.

1280x720p

1 280 x 720 pixel progressive images are output.

1920x1080i

1 920 x 1 080 pixel interlaced images are output.

1920x1080p

1 920 x 1 080 pixel progressive images are output.

 When the setting is changed, the picture may be disturbed or some time may be required for it to appear.

 When the setting is changed, a confirmation message appears. If the picture is properly displayed, select Yes

then press ENTER. If it is not properly displayed, select No then press ENTER.

 If the picture no longer appears after changing the setting, set it back to 720x480p/

720x576p. See Setting the

Component Out and HDMI Resolution settings back to their defaults on page 28.

HDMI Color

(DV-420V only)

Full range RGB

The colors become denser. Select this if dark colors seem dis-

played in a uniform black.

RGB

The colors become lighter. Select this if the dark colors seem too

light.

Component

Select this when connected to an HDMI-compatible TV. The sig-

nals are sent in color difference (8-bit) format.

The settings can only be changed when the player and HDMI-compatible device are connected using an HDMI

cable.

The factory default settings are indicated in italic.

Language settings

 Some discs will not change to the selected language.

 On some discs, the language is changed on a menu screen. For such discs, change the

language on the menu screen.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 95 96

Commentaires sur ces manuels

Pas de commentaire

Pioneer DV-320-S Manuel d'utilisateur Page 31

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Pioneer DV-320-S