Pioneer DCS-404K Manuel d'utilisateur télécharger pdf (Page 41)

41Troubleshooting

Troubleshooting

PROBLEM CAUSE CORRECTION

No Power

The power cord is disconnected. Plug the power cord into the wall outlet securely.

No Picture

The TV is not set to receive the DVD signal.

Select the appropriate video input mode on the TV so

the picture from the DVD Receiver appears on the TV

screen.

The video cables are not connected securely.

Connect the video cables securely to both the TV and

DVD Receiver.

There is little or no

sound

Equipment connected via the audio cable is not set to

receive DVD signal output.

Select the correct input mode of the audio receiver so

you can hear the sound from the DVD receiver.

The audio cables are not connected to the speakers or

receiver securely.

Connect the audio cables into the connection

terminals correctly.

If not, connect speaker cables correctly. Speaker cables connected correctly.

The DVD picture

quality is poor

The disc is dirty. Clean the disc using a soft cloth with outward strokes.

A DVD/CD will not

play

No disc is inserted. Insert a disc.

An unplayable disc is inserted.

Insert a playable disc (check the disc type, colour

system and regional code).

The disc is inserted upside down.

Place the disc with the label or printed side facing

upwards.

The menu is open on screen. Press SETUP to close the menu screen.

There is a parental lock which prevents the playback of

DVDs with a certain rating.

Enter your password or change the rating level.

Humming noise

heard while a DVD

or CD is playing

The disc is dirty. Clean the disc using a soft cloth with outward strokes.

The DVD receiver is located too close to the TV, causing

feedback.

Move DVD receiver and audio components further

away from your TV.

Radio stations

can’t be tuned in

properly

The antenna is positioned or connected poorly.

Check the antenna connection and adjust its position.

Attach an external aerial if necessary.

The signal strength of the radio station is too weak. Tune to the station manually.

No stations have been preset or preset stations have

been cleared (when tuning by scanning preset channels).

Preset some radio stations, see page 35 for details.

The remote control

doesn’t work well /

at all

The remote is not pointed directly at the unit. Point the remote directly at the unit.

The remote is too far from the unit. Use the remote within 23 feet (7m) of the DVD receiver.

There is an obstacle in the path between the remote

control and the unit.

Remove the obstacle.

The battery in the remote control is at. Replace the battery with new ones.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47 48

Commentaires sur ces manuels

Pas de commentaire

Pioneer DCS-404K Manuel d'utilisateur Page 41

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Pioneer DCS-404K