search

Pioneer N-70A Manuel d'utilisateur Page 25

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 42
  • Table des matières
  • MARQUE LIVRES
    • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 24
25
7
7
Perform network settings
Network setting
If a broadband router (with built-in DHCP server function) is
connected to this unit, you can simply turn on the DHCP
server function without having to set up the network
manually. Before you set up the network, consult with your
ISP or the network manager for the required settings. It is
advised that you also refer to the operation manual supplied
with your network component. Any changes made to a router
without the DHCP server function must be reflected to unit
network settings.
1. Automatic setting
Make sure that the LAN cable connections has completed
(page 11
).
1
Press SETUP.
The Initial Setup screen is shown on the display.
2
Select Network Setting
Network Configuration.
3
Use
/
to select DHCP On, then press ENTER.
Select Don’t Use Proxy Server.
Note
•
If your router does not support DHCP, please manually set
the network settings. Confirm the 2. Manual setting.
2. Manual setting
1
Press SETUP.
The Initial Setup screen is shown on the display.
2
Select Network Setting
Network Configuration.
3
Use
/
to select DHCP Off, then press ENTER.
4
Use
///
to input the IP address, then press
ENTER.
/: Moves the adjusting digit.
/: Increases or decreases values.
IP Address
The IP address to be entered must be defined within the
following ranges. If the IP address defined is beyond the
following ranges, you cannot play back audio files stored
on components on the network or listen to Internet radio
stations.
Class A: 10.0.0.1 to 10.255.255.254 / Class B: 172.16.0.1 to
172.31.255.254 / Class C: 192.168.0.1 to 192.168.255.254
Subnet Mask
If an xDSL modem or a terminal adapter is directly
connected to this unit, enter the subnet mask listed in
your ISP documentation. In most of the cases, enter
255.255.255.0.
Default Gateway
If a gateway (router) is connected to this unit, enter the
corresponding IP address.
Primary DNS Server/Secondary DNS Server
If there is only one DNS server address listed in your ISP
documentation, enter Primary DNS Server. In case there
are more than two DNS server addresses, enter
Secondary DNS Server in the other DNS server address
field.
•
When you connect this unit to the Internet via a proxy
server, proxy server settings are required.
Select Use Proxy Server and press ENTER in step 1.
3. Proxy Server setting
Then Enter Proxy Host Name and the port number of
your proxy server in the Proxy Port field.
Friendly Name
Network Configuration
Network Setting
DHCP Off
DHCP On
Network Configration
Friendly Name
Network Configuration
Network Setting
IP Address
255
.
255 255 255
..
Vue de la page 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 41 42

Commentaires sur ces manuels

Pas de commentaire
Produits connexes et manuels pour Amplificateurs de casque Pioneer N-70A
Amplificateurs de casque Pioneer U-05 Manuel d'utilisateur   (14 pages)
  • Brew Express T-Mobile Compix Elektral Post Protector
  • Kenmore Micro-ondes Amazon Câbles de téléphone portable Harman Kardon Récepteurs AV Saturn Alarme de voiture Dialogic Logiciel
  • Highpoint RocketRAID 3540 Hannsg HB175A Liebherr 172 EC-B 8 Litronic Hannsg HH251 Sony STR-DH800
  • DFI CM33-TC Manuel de l'utilisateur Bosch LBB 1968 Manuel de l'utilisateur Brother MFC-J870DW Manuel de l'utilisateur LG N2R1DD1 Manuel de l'utilisateur Pioneer DEH-4700MP Manuel de l'utilisateur