Pioneer HTS-260 Manuel d'utilisateur télécharger pdf (Page 29)

Other connections

English

•

VOL.C ON

– When this unit is switched on, or the

input function is changed, the volume on the plasma

display is muted so only sound from this unit is

heard.

•

VOL.C OFF

– This unit does not control the volume of

the plasma display

Automatic plasma display input switching

In order that the plasma display can switch automatically

to the correct input when you switch the input function of

the receiver subwoofer, you need to tell it how your

system is connected.

For example, if you connected your DVD player to the

DVD

input on the receiver subwoofer, and to input 2 on

your plasma display, select the

DVD PDP2

setting here

so that when you switch the input function of the receiver

subwoofer to

DVD

to watch your DVD player, the plasma

display will automatically switch to input 2.

For each receiver subwoofer input function (

DVD

DTV

PC(PC/GAME)

AUX

) you can select:

•

NONE

– does not switch the plasma display input

•

PDP1

PDP5

– switches the plasma display input to

one of the numbered inputs (1 to 5)

•

TVTN

– switches the plasma display to its built-in

TV tuner

Note

• The number of video inputs available will depend on

the plasma display you’ve connected.

• The

PDP5

input may be called ‘PC Input’ (or similar)

on your plasma display.

• The SR+ setting remains in effect even in standby.

• The SR+ setting does not affect the FM/AM tuner

function.

Using the SR+ mode with a Pioneer plasma

display

1 Press SR+ on the remote.

2 Use

/

(cursor left/right) to select SR+ ON

then press ENTER.

• The SR+ setting is maintained even after switching

the receiver subwoofer into standby then back on.

Automatic muting and input switching will be

effective when the receiver subwoofer is switched on.

• If you disconnect the SR+ cable or switch the plasma

display off while SR+ is on, the

SR+ ON

setting

remains.

• To switch to

SR+ OFF

, follow steps

and

, selecting

SR+ OFF

Note

• You can control this unit with the plasma display’s

remote sensor even in standby, but you can’t control

this unit with either this unit’s remote sensor or the

plasma display’s remote sensor when the plasma

display is switched off (AC off) and the SR+ cable is

connected to the

CONTROL IN

jack of this unit.

About the control out jack

Many Pioneer components have SR CONTROL jacks

which can be used to link components together so that

you can use just the remote sensor of one component.

When you use a remote control, the control signal is

passed along the chain to the appropriate component.

Note that if you use this feature, make sure that you also

have at least one set of analog or coaxial digital audio

jacks connected to another component for grounding

purposes.

• Connect the CONTROL IN jack on another Pioneer

component to the CONTROL OUT jack on the

receiver subwoofer.

This will allow you to control the other component (such

as a DVD recorder in a cabinet) by pointing its remote at

the display unit supplied with this receiver subwoofer.

• You can also connect this receiver subwoofer to your

plasma display as described above, in which case

you should point the remote at the plasma display to

control your DVD player, receiver subwoofer, and

plasma display.

Use a cable with a mono mini-plug on each end for the

connection.

SX-SW260_KU.book Page 29 Wednesday, March 29, 2006 2:43 PM

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 71 72

Commentaires sur ces manuels

Pas de commentaire

Pioneer HTS-260 Manuel d'utilisateur Page 29

Commentaires sur ces manuels