Pioneer Elite DV-05 Manuel d'utilisateur Page 54

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 62
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 53
54
<VRB1205>
Troubleshooting
Troubleshooting
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component,
check the points below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances
being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest PIONEER authorized
service center or your dealer to carry out repair work.
Symptom
1.The disc comes back out
even when the disc table is
closed.
2.Playback is not possible.
3.
mark appears on screen.
4. mark appears on screen.
5.Picture playback stops and
the operation button can not
be used.
6. Settings are canceled.
7. No picture.
8. Picture is dark.
9. The screen is stretched or
aspect does not change.
10. Picture disturbance during
playback.
11. When recorded on a VCR
there is disturbance in the
playback picture.
12. Remote control operation is
not possible.
13. Improper operation of TV
set, etc., occurs.
14. Audio is not output or is
distorted.
15. Noticeable difference in
DVD and CD volume.
16. No digital output
Possible causes
÷ The disc is dirty or warped.
÷ The disc is not placed properly on the disc table.
÷ Region No. does not conform with this unit.
÷ Condensation has formed inside the player.
÷ This player cannot play PAL and SECAM format DVD discs.
÷ The disc has been loaded upside down.
÷ The selected function does not operate for that disc.
÷ The operation is prohibited by player.
÷ First stop the disc (press the 7 button), then start playback
again.
÷ When the power is turned off by power failure or unplugging
of the power cord, settings will be canceled.
When unplugging the power cord, please be sure to do so
after first canceling the display window's -off- indicator by
pressing the
STANDBY/ON button on the main unit or the
remote control unit.
÷ Connection is incorrect.
÷ Operation (settings) of TV or AV amplifier is not appropriate.
÷ This unit is compatible with analog copy protect formatted copy
guard. Some discs include a copy prohibit signal and when
these types of discs are played back, the screen may darken
depending on the TV. This not a malfunction of this unit.
÷ The multi aspect setting is not appropriate.
÷ This player is compatible with Macro-Vision System copy guard.
Some discs include a copy prevention signal, and when this
type of disc is played back, stripes etc., may appear on some
sections of the picture depending on the TV. (This is not a
malfunction.)
÷ This player is compatible with analog copy protect technology
copy guard. Some discs include a copy prevention signal and
the copy guard system will prevent proper playback.
÷ The rear panel CONTROL IN jack on the player is being used.
÷ The remote control is too far from the player, or the angle with
the remote sensor is too sharp.
÷ The batteries are exhausted.
÷ Some TVs that have wireless remote control functions may
not operate properly with this remote control.
÷ The DIGITAL OUTPUTs Linear PCM setting is set to 96KHz.
Digital output is prohibited on some discs.
÷ The disc is dirty.
÷ The connection plugs are not inserted fully into the terminals
or are not connected.
÷ The connection plug or terminal is dirty.
÷ Audio cable connection is wrong.
÷ Connection is made to the stereo amplifier's PHONO input
terminal.
÷ The pause mode is engaged.
÷ Stereo amplifier operation is wrong.
(Check input (CD, AUX etc.) selector)
÷ The DVD playing is recorded in DTS audio.
÷ Although you may notice a difference in volume between CDs
and DVDs, this is a the result of a difference in disc recording
methods.
÷ Digital output may not be output during Virtual Dolby Digital
playback.
Operation
Picture
Remote control
Audio
Caution
Static electricity or other external influence may cause malfunctioning of this unit. In this case, unplugging the power cord and then
re-plugging it in will usually reset the unit for proper operation. If this does not correct the problem, please consult your the nearest
PIONEER service center.
Reference page
p.55
p.24
p.57
p.53
p.34
p.15-16
p.35
p.14
p.35
Vue de la page 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 60 61 62

Commentaires sur ces manuels

Pas de commentaire