Pioneer DJM-2000nexus Manuel d'utilisateur télécharger pdf (Page 27)

100

English

Changing the settings

Setup item button

1 Press [LIVE SAMPLER (UTILITY, WAKE UP)] for at least

1 seconds.

The [USER SETUP] mode setting screen is displayed.

The [LIVE SAMPLER (UTILITY, WAKE UP)] indicator flashes.

! To display the [CLUB SETUP] screen, first turn this unit’s power

off, then press [POWER] while pressing [LIVE SAMPLER (UTILITY,

WAKE UP)].

2 Press the setup item button.

The selection items appear.

3 Select the setup item.

Select the item on the touch panel and enter it.

4 Change the item’s setting.

Select the item on the touch panel and enter it.

! Press [SAVE] to save the changes to the [CLUB SETUP] screen.

5 Press [EXIT].

Close the [USER SETUP] mode setting screen.

! To close the [CLUB SETUP] mode setting screen, press the [POWER]

button to turn this unit’s power off.

Setting preferences

Settings indicated in italics are the default settings set upon purchase.

Mode Options settings Selection item 1 Selection item 2 Selection item 3 Descriptions

USER SETUP

MIDI

ZONE11

BUTTON ACTION

TOGGLE

Select the MIDI signal sending method, [TOGGLE]

or [TRIGGER].

TRIGGER

MIDI CHANNEL

1, 2, to 16 Sets the MIDI channel.

ZONE22

BUTTON ACTION

TOGGLE

Select the MIDI signal sending method, [TOGGLE]

or [TRIGGER].

TRIGGER

MIDI CHANNEL

1, 2, to 16 Sets the MIDI channel.

RESET

—

Restores the [TYPE A] – [TYPE D] MIDI settings

to the default values. [RESET] function is unique

to [ZONE2].

FADER START

LINK

CH1 to CH4 ON, OFF

Turns the fader start function on and off for all DJ

players connected to the [LINK] terminals.

CONTROL

CH2, CH3 ON, OFF

Turns the fader start function of the DJ players

connected to the [CONTROL] terminals on and off.

LCD BACK LIGHT

1, 2, 3, 4, 5 — Adjusts the touch panel’s brightness.

VERSION No.

— — — Displays this unit’s software version.

QUANTIZE QUANTIZE

ON, OFF —

Turns use of the beat information obtained from

the player on and off.

CLUB SETUP

SYSTEM

DIGITAL OUT MAX LEVEL

–19 dB, –15 dB, –10 dB, –5 dB —

Sets the maximum level of the sound output from

the [DIGITAL OUT] terminals.

DIGITAL SAMPLING RATE

48 kHz, 96 kHz — Sets the digital signal’s sampling rate.

AUTO STANDBY

ON, OFF — Turns the auto standby function on and off.

MIC

OUTPUT TO BOOTH

MONITOR

ON, OFF —

Sets whether or not to output the microphone’s

audio signals from [BOOTH] terminals.

TALK OVER THRESHOLD

LEVEL

–25 dB, –20 dB, –15 dB,

–10 dB

—

Sets the talkover sensitivity. The talkover function

is activated when a sound with a volume above the

set volume is input to the microphone.

TALK OVER LEVEL

–25 dB, –20 dB, –15 dB,

–10 dB

—

Sets the attenuation level for the sound other than

the microphone’s sound when the talkover func-

tion is activated.

TOUCH PANEL

— — —

The touch panel’s calibration is adjusted by press-

ing [+] in order.

PEAK LIMITER PEAK LIMITER

ON, OFF —

Alleviates sudden, unpleasant digital clipping of

the master output.

FACTORY RESET

YES, NO — — Restores all the settings to their factory defaults.

1 Changes the MIDI settings of the buttons on the control panel, [FREQUENCY MIX] and [SIDECHAIN REMIX].

2 Changes the MIDI settings for [TYPE A] to [TYPE D] on the MIDI control screen.

About the auto standby function

When [AUTO STANDBY] is set to [ON], the standby mode is set automatically if 4 hours pass with all of the conditions below met.

— That none of this unit’s buttons or controls are operated.

— That no audio signals of –10 dB or greater are input to this unit’s input terminals.

— That no PRO DJ LINK connections are made.

! The standby mode is canceled when [LIVE SAMPLER (UTILITY, WAKE UP)] is pressed.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 99 100

Commentaires sur ces manuels

Pas de commentaire

Pioneer DJM-2000nexus Manuel d'utilisateur Page 27

Commentaires sur ces manuels

Produits connexes et manuels pour Contrôleurs de DJ Pioneer DJM-2000nexus