Pioneer PDR-609 Manuel d'utilisateur télécharger pdf (Page 20)

20

En

4 Getting Started

Synchro recording won't work if the source

is already playing!

The recorder goes into all-sync record

pause and the SYNC indicator starts to

blink.

SYNC–ALL

SYNC

CD-R

The display shows the all-track sync mode,

with the SYNC indicator blinking to show

that recording can start.

4 Play the source.

The recorder starts recording automati-

cally.

5 After recording all tracks from

the source, the recorder goes

into record-pause.

After the recorder encounters about five

seconds of continuous silence, it assumes

the end of the source has been reached and

goes into record-pause and the display

shows the SYNC ALL message again.

Be careful: If the recorder detects

another signal or start ID (DAT or DCC) it

will start recording again!

• The recorder will enter record-pause if

the digital signal is interrupted for

more than 5 seconds—see Digital

signal interruptions on page 18.

6 Press 7 to finish recording.

After pressing 7, the display shows PMA

REC

while it records the track information

to the disc.

Note: If you find that synchro recording

does not seem to work, see the trouble-

shooting section on pages 40-42 for

possible remedies.

ENTER

CURSOR

MENU/

DELETE

NAMEMARK

SET

CLEAR

DISPLAY

/CHARA

7

1

¡

8

3

4

¢

ABC DEF

GHI MNOJKL

PQRS TUV WXYZ

REC SYNCHRO

REPEAT RANDOM NAME CLIP

I

NPUT

SELECTER

FADER

SKIP PLAY

SKIP ID

PROGRAM CHECK CLEAR

AUTO /

MANUAL

123

4

56

78

9

10/0 >10

SCROLL

TIME

Î

•

6

3

2

Recording all tracks

from a source

If you want to copy all the tracks from a

source, use this mode. Like the 1-track

synchro recording mode, the recorder

starts and stops automatically. When

recording from MD or CD, you can play the

source in either normal play mode, or

program play if you’d like the recorded

tracks in a different order to the original.

We do not recommend recording from a

DAT in program play mode—use the 1-

track synchro recording mode if you want

to record the tracks in a different order.

If you are recording from a noisy analog

source, such as a vinyl record, or from a

source with long quiet sections, the

recorder may not recognize the end of

tracks. In this case, you can still use this

mode, but it may be better to use manual

track numbering (see page 33).

1 Load a CD-R or CD-RW disc.

Check the display to make sure that there's

enough space on the disc for what you

want to record.

2 Press INPUT SELECTOR to

choose an input.

Pressing INPUT SELECTOR repeatedly

switches the active input:

Analog - Optical - Coaxial

The recorder's display indicates the current

input.

3 Make sure that the source is not

playing, then press SYNCHRO

twice.

Press SYNCHRO repeatedly to change the

recording mode:

DIGITAL

REC LEVEL

ANALOG

REC LEVEL

MENU/

DELETE

TEXT

SYNCHRO

PUSH ENTER

RL

ANALOG

REC BALANCE

Legato Link Conversion

CD TEXT

◊ÛB

-

>?/

MONITOR

INPUT

SELECTOR

AUTO

MANUAL

AUTO

MANUAL

TRACK NO.

WRITE

TIME

FINALIZEERASE

SCROLL

1

2

3

6

SYNC–1

SYNC-1

SYNC–ALL

SYNC

SYNC–FINAL

SYNC

CD-R

CD-R

CD-R

O1 O1 OO:OO

FINALIZE

CD-R

1-track sync

All-track sync

All-track sync w/ finalization

Record-pause (no sync)

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

Commentaires sur ces manuels

Pas de commentaire