Pioneer DV-S88A Manuel d'utilisateur télécharger pdf (Page 30)

Setting the Digital Audio

Output to be Compatible with

your AV Component – DVD

This player is capable of digital audio output for Dolby

Digital, DTS, MPEG, and signals with a sampling rate of

96 kHz. Make settings in the Setup screen Audio 1

menu to reflect the capabilities of the components that

you have made digital connections to.

Notes

• If you have already completed the Setup Navigator screen

operations, the settings on this page have already been set

by the player.

• If you have made only stereo line connections (analog)

using the supplied audio cord, it is not necessary to make

any changes in this menu.

Dolby Digital Out

This player is capable of outputting the Dolby Digital

surround sound audio signal. When the player is

connected to an AV component that has a built-in Dolby

Digital decoder, select [Dolby Digital]. This player can

also convert the Dolby Digital signal to a digital Linear

PCM signal, the same digital signal output from a CD.

Select [Dolby Digital 3 PCM] when you have made

connections to an amplifier or receiver with a Dolby Pro

Logic decoder or a Digital Analog Converter (DAC).

DTS Out

This player is capable of outputting DTS digital audio for

DVDs recorded in DTS. When this player is connected to

an AV component that has a built-in DTS decoder, select

[DTS]. If your system is not equipped to decode DTS,

select [Off]. Refer to the operating instructions supplied

with your audio components if you are unsure about

compatibility with DTS.

Settings: Dolby Digital*

Dolby Digital 3 PCM

* Factory setting

Settings: Off*

DTS

* Factory setting

Note

If you have made digital audio connections to component(s)

not equipped to decode the DTS digital bitstream, be sure to

select [Off]. If a DTS signal is output without decoding, the

output is digital noise that could potentially cause damage to

your speakers.

Settings: Down Sample On*

Down Sample Off

* Factory setting

Audio1 Audio2 GeneralLanguageVideo

DTS Out -

Linear PCM Out – Down Sample On

MPEG Ou

t – MPEG 3 PCM

Move

Exit

Dolby Digital 3 PCM

Dolby Digital

SETUP

Dolby Digital Out

Digital Out – On

Dolby Digital Out –

DTS Out

Linear PCM Out – Down Sample On

MPEG Ou

t – MPEG 3 PCM

Move

Exit

DTS

Off

Dolby Digital

SETUP

Audio1 Audio2 GeneralLanguageVideo

Digital Out – On

MPEG Ou

t - PCM

Dolby Digital Out –

DTS Out –

Linear PCM Out

Move

Exit

Down Sample Off

Down Sample On

Dolby Digital

Off

SETUP

Audio1 Audio2 GeneralLanguageVideo

Digital Out – On

Linear PCM Out

This player is capable of outputting digital signals with a

sampling frequency of 96 kHz. If you have made

connections to a component capable of processing this

signal rate, select [Down Sample Off] for the signal to

be output as is. As some components are incapable of

processing digital signal input with sampling rates of 96

kHz, selecting [Down Sample On] compresses the

signal to a standard signal with a sampling rate of

48 kHz.

If [Digital Out] is set to [On] and [Linear PMC Out] is set

to [Down Sample On], you’ll see the message “Digital

Out Converted” appear on-screen when either the AUDIO

button is pressed or when playing 192 kHz source materila.

Notes

• On DVDs that contain copy protection, the 96 kHz signal

may only be output from the analog audio jacks. When this

type of disc is encountered, even if [Down Sample Off] is

selected, the player automatically outputs the digital audio

signal at a compressed rate of 48 kHz or 44.1 kHz.

• Changes to the [Linear PCM Out] setting cannot be made

when a disc is playing.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 71 72

Commentaires sur ces manuels

Pas de commentaire

Pioneer DV-S88A Manuel d'utilisateur Page 30

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de CD Pioneer DV-S88A