Pioneer CD/MP3 Manuel d'utilisateur télécharger pdf (Page 32)

07

Section

Audio Adjustments

• If you switch the SFEQ mode, the H.P.F. func-

tion is automatically switched off. By switch-

ing the H.P.F. function on after selecting the

SFEQ mode, you can combine H.P.F. function

with SFEQ function.

Using balance adjustment

You can select a fader/balance setting that pro-

vides an ideal listening environment in all occu-

pied seats.

1 Press AUDIO

to select Fad.

Press

AUDIO until Fad appears in the display.

• If the balance setting has been previously

adjusted, Bal will be displayed.

2 Press 5 or ∞ to adjust front/rear speaker

balance.

Each press of 5 or ∞ moves the front/rear

speaker balance towards the front or the rear.

• Fad F15 – Fad R15 is displayed as the front/rear

speaker balance moves from front to rear.

• Fad 0 is the proper setting when only two

speakers are used.

• When the rear output setting is Rear SP:S.W,

you cannot adjust front/rear speaker balance.

Refer to Setting the rear output and subwoofer

controller on page 38.

3 Press 2 or 3 to adjust left/right speaker

balance.

When you press 2 or 3, Bal 0 is displayed. Each

press of 2 or 3 moves the left/right speaker

balance towards the left or the right.

• Bal L9 – Bal R9 is displayed as the left/right

speaker balance moves from left to right.

Using the equalizer

The graphic equalizer lets you adjust the equal-

ization to match car interior acoustic character-

istics as desired.

Recalling equalizer curves

There are seven stored equalizer curves which

you can easily recall at any time. Here is a list of

the equalizer curves:

Display Equalizer curve

SUPER BASS Super bass

POWERFUL Powerful

NATURAL Natural

VOCAL Vocal

CUSTOM1,2 Custom1,2

FLAT Flat

• CUSTOM1 and CUSTOM2 are adjusted equal-

izer curve.

• A separate CUSTOM1 curve can be created

for each source. (The Built-in CD player and

Multi-CD player are set to the same Equalizer

Curve Adjustment setting automatically.)

• If you make adjustments when a curve other

than CUSTOM2 is selected, the equalizer curve

settings are memorized in CUSTOM1.

•A CUSTOM2 curve can be created common to

all sources.

• If you make adjustments when the CUSTOM2

curve is selected, the CUSTOM2 curve is

updated.

• When FLAT is selected no supplement or

correction is made to the sound. This is useful

to check the effect of the equalizer curves by

switching alternatively between FLAT and a set

equalizer curve.

En

32

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 95 96

Commentaires sur ces manuels

Pas de commentaire