Pioneer X-HM72 Manuel d'utilisateur télécharger pdf (Page 5)

English

Français

Deutsch

Nederlands

Italiano

Español

5

En

Connecting to network

© 2014 PIONEER HOME ELECTRONICS CORPORATION.

All rights reserved.

The following is one example of how to connect to a network.

For other connections, please refer to the attached Operating Instructions (CD-ROM)

Connecting this receiver using

wireless LAN

Connecting this receiver using

wired LAN

1. Be sure your router supports DHCP server

function.

2. Use the LAN cable to connect this receiver

and your router.

3. Plug the power cord into an AC outlet.

Press



STANDBY/ON.

B: Connecting to a router with WPS-

PBC function

1. Be sure the LAN cable is not connected to

the receiver.

2. Plug the power cord into an AC outlet.

Press



STANDBY/ON.

3. Press NET SERVICE



SETUP on the

remote control.

4. Select Network Setting



WPS.

5. Use



to select PBC (Push Button

Conﬁ guration) and then press ENTER.

6. Press the WPS button on the router.

If the connection does not succeed, refer

to Operating Instructions (CD-ROM) (page

44) and redo the setting again.

PBC (Push Button Conﬁ guration)

•

The wireless connection setting is

automatically conﬁ gured by pressing

the WPS button on the WPS compatible

wireless LAN device.

C: Connecting to a router without

WPS-PBC function

1. Be sure the LAN cable is not connected to

the receiver.

2. Plug the power cord into an AC outlet.

Press



STANDBY/ON.

3. Press NET SERVICE



SETUP.

The Initial Setup screen is shown on the

display.

4. Select Network Setting



Network

Conﬁ guration.

5. Use



to select Wireless, then press

ENTER.

Wireless

Wired

Network Configuration

6. Use



to select Auto, then press

ENTER.

Manual

Wireless Accessory Configuration

Web Control

Auto

Wireless

7. Use



to select the available wireless

network you want to connect to, then press

ENTER.

The receiver will only display the names of

2.4 GHz wireless LAN routers (SSID).

A: Connection settings using an iOS

device (with iOS 5.0 or later)

You can apply iPod/iPhone/iPad (iOS device

with iOS ver 5.0 or later)'s Wi-Fi settings to

this receiver.

1. Be sure the LAN cable is not connected to

the receiver. Unlock your iPod/iPhone/iPad.

2. Plug the power cord into an AC outlet.

Press



STANDBY/ON.

3. Unlock your iPod/iPhone/iPad. Check that

the Wi-Fi mark is displayed on the iOS

device screen.

Share Wi-Fi Settings?

Ignore

4. Press iPod/USB on the remote control.

Connect the iOS device to the USB

terminal.

5. Press SETUP.

6. Select Network Setting



Network

Conﬁ guration



Wireless



iOS Device

and then press ENTER.

7. Tap Allow on iPod/iPhone/iPad.

Share Wi-Fi Settings?

Ignore

The Wi-Fi settings of your iPod/iPhone/

iPad are applied to the receiver.

XXXXXXXXX

Available Wireless Networks

XXXXXXXXXXXXXXXX

XX

A

va

iA

va

il

a

bll

a

bl

e

Wi

e

Wi

re

l

ere

l

ess

N

ss

N

etwoetwor

ks

r

ks

8. Use



to enter the Pass Phrase or

WEP Key.





Enter Password

[REPEAT] Change Text

Delete One Character[CLEAR]

A



: Moves the adjusting digit.



: Changes displayed character.

REPEAT: Switches character types.

CLEAR: Deletes one character at a time.

9. Use



to select DHCP On, then press

ENTER.

Select Don’t Use Proxy Server, then

press ENTER.

DHCP Off

DHCP On

Network Configuration

10. In order to activate the setup, press

ENTER

.

Refer to Operating Instructions (CD-ROM)

(Connection method 4 | Have the receiver

automatically detect the wireless LAN

router and perform settings on page 33)

and redo the setting again.

1 2 3 4 5 6 7 8 9 10 ... 35 36

Commentaires sur ces manuels

Pas de commentaire