Pioneer SUPER TUNER III D DEH-P8850MP Manuel d'utilisateur télécharger pdf (Page 53)

Black plate (53,1)

Using the equalizer

The equalizer lets you adjust the equalization

to match car interior acoustic characteristics

as desired.

Recalling equalizer curves

There are seven stored equalizer curves which

you can easily recall at any time. Here is a list

of the equalizer curves:

Display Equalizer curve

Powerful Powerful

Natural Natural

Vocal Vocal

Flat Flat

Custom1 Custom 1

Custom2 Custom 2

Super Bass Super bass

! Custom1 and Custom2 are adjusted equal-

izer curves that you create. Adjustments

can be made with a 16-band graphic equal-

izer.

! When Flat is selected no supplement or

correction is made to the sound. This is

useful to check the effect of the equalizer

curves by switching alternatively between

Flat and a set equalizer curve.

% Press EQ to select the equalizer.

Press EQ repeatedly to switch between the fol-

lowing equalizers:

Powerful—Natural—Vocal—Flat—Custom1

—Custom2—Super Bass

Adjusting equalizer curves

The factory supplied equalizer curves, with the

exception of Flat, can be adjusted to a fine de-

gree (nuance control).

1 Use MULTI-CONTROL to select the gra-

phic equalizer adjustment.

Powerful appears in the display.

# If the equalizer curve has been previously se-

lected, the curve of that previously selected will

be displayed instead of Powerful.

2 Push MULTI-CONTROL left or right to

select an equalizer curve.

Each time MULTI-CONTROL is pushed left or

right, equalizer curves are selected in the fol-

lowing order:

Powerful—Natural—Vocal—Flat—Custom1

—Custom2—Super Bass

3 Push MULTI-CONTROL up or down to

adjust the equalizer curve.

Each time MULTI-CONTROL is pushed up or

down, the equalizer curve increases or de-

creases respectively.

+6 to –6 is displayed as the equalizer curve is

increased or decreased.

# The actual range of the adjustments are differ-

ent depending on which equalizer curve is se-

lected.

# The equalizer curve with all frequencies set to

0 cannot be adjusted.

Adjusting 16-band graphic

equalizer

For Custom1 and Custom2 equalizer curves,

you can adjust the level of each band.

! A separate Custom1 curve can be created

for each source. (The built-in CD player and

the multi-CD player are set to the same

equalizer adjustment setting automati-

cally.) If you make adjustments when a

curve other than Custom2 is selected, the

equalizer curve settings will be memorized

in Custom1.

! A Custom2 curve can be created common

to all sources. If you make adjustments

when the Custom2 curve is selected, the

Custom2 curve will be updated.

<CRD4089-A/N>53

Audio Adjustments

En

53

English

Section

11

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 163 164

Commentaires sur ces manuels

Pas de commentaire