Pioneer DEH-P4500R Manuel d'utilisateur télécharger pdf (Page 37)

2 Press a or b to turn WARN on or off.

Pressing a or b will turn WARN on or off and

that status will be displayed (e.g.,

WARN :ON).

Switching the auxiliary setting

It is possible to use auxiliary equipment with

this unit. Activate the auxiliary setting when

using auxiliary equipment connected to this

unit.

1 Press FUNCTION to select AUX.

Press FUNCTION repeatedly until AUX ap-

pears in the display.

2 Press a or b to turn AUX on or off.

Pressing a or b will turn AUX on or off and

that status will be displayed (e.g.,

AUX :ON).

Switching the dimmer setting

To prevent the display from being too bright at

night, the display is automatically dimmed

when the cars headlights are turned on. You

can switch dimmer on or off.

1 Press FUNCTION to select DIMMR.

Press FUNCTION repeatedly until DIMMR ap-

pears in the display.

2 Press a or b to turn DIMMR on or off.

Pressing a or b will turn DIMMR on or off

and that status will be displayed (e.g.,

DIMMR :ON).

Setting the rear output and

subwoofer controller

This units rear output (rear speaker leads out-

put) can be used for full-range speaker

(R-SP :FUL) or subwoofer (R-SP :S/W) connec-

tion. If you switch the rear output setting to

the R-SP :S/W, you can connect a rear speaker

lead directly to a subwoofer without using an

auxiliary amp.

Initially, the unit is set for rear full-range speak-

er connection (R-SP :FUL). When rear output

are connected to full range speakers (when

R-SP :FUL is selected), you can connect the

RCA subwoofer output to a subwoofer. In this

case, you can select whether to use the sub-

woofer controllers (low pass filter, phase)

built-in P/O :S/W or the auxiliary P/O :FUL.

1 Press FUNCTION to select R-SP.

Press FUNCTION repeatedly until R-SP ap-

pears in the display.

2 Press a or b to switch the rear output

setting.

Pressing a or b will switch between

R-SP :FUL (full-range speaker) and R-SP :S/W

(subwoofer) and that status will be displayed.

# When no subwoofer is connected to the rear

output, select R-SP :FUL.

# When a subwoofer is connected to the rear

output, set for subwoofer R-SP :S/W.

# When the rear output setting is R-SP :S/W,

you cannot change the subwoofer controller.

3 Press c or d to switch the subwoofer

output or non fading output.

Pressing c or d will switch between P/O :S/W

and P/O :FUL and that status will be dis-

played.

Initial Settings

En

37

English

Section

09

HHHHHHHHHHHHHH

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 87 88

Commentaires sur ces manuels

Pas de commentaire