Pioneer DEH-3050UB Manuel d'utilisateur télécharger pdf (Page 18)

Introduction of audio

adjustments

1 Press MULTI-CONTROL to display the

main menu.

2 Use MULTI-CONTROL to select AUDIO.

Turn to change the menu option. Press to se-

lect.

3 Turn MULTI-CONTROL to select the

audio function.

FADER/BALANCE (balance adjustment)—

PRESET EQUALIZER (graphic equalizer recall)

—EQ SETTING 1 (graphic equalizer adjust-

ment)—EQ SETTING 2 (graphic equalizer fine

adjustment)—LOUDNESS (loudness)—

SW SETTING 1 (subwoofer on/off setting)—

SW SETTING 2 (subwoofer setting)—

HIGH PASS FILTER (high pass filter)—

BASS BOOST (bass boost)—SRC LV ADJUST

(source level adjustment)

4 Press MULTI-CONTROL to display the

setting mode of each function.

5 Adjust the each function.

Notes

! You can also select the audio function by

pressing AUDIO on the remote control.

! To return to the previous display, press BACK.

! To return to the main menu, press and hold

BACK.

! To return to the ordinary display, press

BAND/ESC.

! When the subwoofer controller setting is

PREOUT:REAR, you cannot switch to

SW SETTING 1 (subwoofer on/off setting).

(Refer to page 23.)

! You can select the SW SETTING 2 only when

subwoofer output is turned on in

SW SETTING 1.

! When selecting FM as the source, you cannot

switch to SRC LV ADJUST.

! If you do not operate functions within about

30 seconds, the display automatically returns

to the ordinary display.

Using balance adjustment

You can change the fader/balance setting so

that it can provide the ideal listening environ-

ment in all occupied seats.

1 Use MULTI-CONTROL to select

FADER/BALANCE.

2 Press MULTI-CONTROL to display the

setting mode.

3 Press MULTI-CONTROL to select the seg-

ment you wish to set.

Press MULTI-CONTROL repeatedly to switch

between fader and balance.

4 Turn MULTI-CONTROL to adjust speaker

balance.

Front/rear speaker balance can be adjusted

between FAD F15 and FAD R15.

Left/right speaker balance can be adjusted be-

tween BAL L15 and BAL R15.

# You can also perform the same operations by

pushing MULTI-CONTROL up or down.

# FAD 0 is the proper setting when only two

speakers are used.

# When the rear output setting is

REAR SP :SUB W, adjusting the front/rear speak-

er balance is not effective. Refer to Setting the

rear output and subwoofer controller on page

23.

Using the equalizer

The equalizer lets you adjust the equalization

to match the car’s interior acoustic character-

istics as desired.

Audio Adjustments

En

18

Section

03

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 92 93

Commentaires sur ces manuels

Pas de commentaire