Pioneer AVH-P5000DVD Manuel d'utilisateur télécharger pdf (Page 46)

1 Touch CLOCK ADJ on the system menu.

2 Touch ON/OFF to turn the clock display

on.

# To turn the clock display off, touch ON/OFF

again.

3 Touch c or d to select the segment of

the clock display you wish to set.

Each time you touch c or d it will select one

segment of the clock display:

Hour—Minute

As you select segments of the clock display

the segment selected will be highlighted.

4 Touch a or b to put a clock right.

Notes

! You can match the clock to a time signal by

touching JUST.

— If 00 to 29, the minutes are rounded down.

(e.g., 10:18 becomes 10:00.)

— If 30 to 59, the minutes are rounded up.

(e.g., 10:36 becomes 11:00.)

! Even when the sources are off, the clock dis-

play appears on the display.

Setting for rear view camera

(back up camera)

CAUTION

Pioneer recommends the use of a camera

which outputs mirror reversed images, other-

wise screen image may appear reversed.

This unit features a function that automatically

switches to the rear view camera video (REAR

CAMERA IN jack) when a rear view camera is

installed on your vehicle. When the gear shift

is in REVERSE (R) position, the video auto-

matically switches to a rear view camera

video. (For more details, consult your dealer.)

! After you set up the rear view camera set-

ting, move the gear shift in REVERSE (R)

and confirm if a rear view camera video

can be shown on the display.

! If the display should be switched to a rear

view camera video by error while you are

driving forward, change the rear view cam-

era setting.

! To end watching a rear view camera video

and return to the source display, press and

hold VOLUME/MUTE.

! Even while driving, rear view camera image

can be displayed. To do this, touch

REARVIEW source icon. In this case, touch

REARVIEW again to turn off the rear view

camera. For details, refer to Selecting a

source on page 16.

% Touch CAMERA POLARITY on the sys-

tem menu to select an appropriate setting.

! BATTERY – When the polarity of the con-

nected lead is positive while the gear shift

is in REVERSE (R) position

! GROUND – When the polarity of the con-

nected lead is negative while the gear shift

is in REVERSE (R) position

! OFF – When a rear view camera is not con-

nected to this unit

Adjusting the LCD panel slide

position

You can adjust the LCD panel slide position so

that the panel is set back or forward.

1 Touch NEXT on the system menu.

2 Touch FLAP SET BACK to turn the set

back on.

The LCD panel slides to the back.

# Touch FLAP SET BACK again to turn the set

back off and the LCD panel slides to the front.

Setting the automatic open

function

To prevent the display from hitting the shift

lever of an automatic vehicle when it is in P

(park) position, or when you do not wish the

display to open/close automatically, you can

set the automatic open function in the manual

mode.

1 Touch NEXT on the system menu.

Operating this unit

En

46

Section

03

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 102 103

Commentaires sur ces manuels

Pas de commentaire