Pioneer AVH-P4200DVD Manuel d'utilisateur télécharger pdf (Page 50)

Digital Signal Processor

Introduction of DSP adjustments

You can use this unit to control a DEQ-P6600

multi-channel processor (sold separately).

By carrying out the following settings/adjust-

ments in the order shown, you can effortlessly

create a finely-tuned sound field.

1 Setting the speaker setting

2 Using the position selector

3 Auto TA and EQ (auto-time alignment and auto-

equalizing)

4 Adjusting time alignment

5 Adjusting the speaker output levels using a

test tone

6 Selecting a cross-over frequency

7 Adjusting the speaker output levels

8 Adjusting the 3-band parametric equalizer

Notes

! You cannot use the audio functions when

playing discs recorded at a sampling fre-

quency higher than 96 kHz. The equalizer

curve setting, Position, Auto EQ and

Auto TA will also be canceled.

! Sound is only emitted from front speakers

when playing discs recorded at a sampling

frequency higher than 96 kHz.

! When selecting FM as the source, you cannot

switch to Source Level Adjuster.

! You can only switch to

Dynamic Range Control when you are play-

ing DVD discs.

! You can only switch to Time Alignment when

either Front-L or Front-R is selected in

Position.

! When the speaker setting for both the center

and rear speakers are set to OFF, you cannot

switch to Dolby Pro Logic II.

! When the multi-channel processor (DEQ-

P6600) is connected to this unit, you cannot

use MUTE function.

Using the position selector

One way to assure a more natural sound is to

optimize the stereo image and place you right

in the center of the sound field. With the posi-

tion selector function, you can automatically

adjust the speaker output levels and insert a

delay time to match the number and position

of the occupied seats. When used in conjunc-

tion with the SFC, this feature will make the

sound image more natural and offer a panora-

mic sound that envelops you.

1 Display the DSP function menu.

Refer to Introduction of menu operations on

page 46.

2 Touch Position on the DSP function

menu.

3 Touch c/d/a/b to select a listening po-

sition.

Key Display Position

c Front-L Left front seat

d Front-R Right front seat

a Front Front seats

b All All seats

# To cancel the selected position, touch the

same key again.

Note

When adjustments are made to the listening po-

sition, the speaker outputs are automatically set

to the appropriate levels. To tailor the levels more

precisely, refer to Adjusting the speaker output le-

vels using a test tone on page 55 or Adjusting the

speaker output levels on page 54.

Using fader/balance adjustment

You can change the fader/balance setting to

provide an ideal listening environment for all

of the occupied seats.

Section

Menu operations

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 95 96

Commentaires sur ces manuels

Pas de commentaire

Pioneer AVH-P4200DVD Manuel d'utilisateur Page 50

Commentaires sur ces manuels

Produits connexes et manuels pour Autoradio Pioneer AVH-P4200DVD