Pioneer AVH-P4000DVD Manuel d'utilisateur télécharger pdf (Page 12)

When an operation is prohibited

When you are watching a DVD and attempt to

perform an operation, it may not be performed

because of the programming on the disc.

When this happens, the icon

appears on

the screen.

! The icon

may not appear with certain

discs.

Resetting the microprocessor

Pressing RESET lets you reset the micropro-

cessor to its initial settings without changing

the bookmark information.

The microprocessor must be reset under the

following conditions:

! Prior to using this unit for the first time

after installation

! If the unit fails to operate properly

! When strange or incorrect messages ap-

pear on the display

1 Turn the ignition switch OFF.

2 Press RESET with a pen tip or other

pointed instrument.

RESET button

Note

After completing connections or when you want

to erase all memorized settings or return the unit

to its initial (factory) settings, switch your engine

ON or set the ignition switch to ACC ON before

pressing RESET.

Feature demo mode

The feature demo automatically starts when

you select the source OFF. The demo con-

tinues while the ignition switch is set to ACC

or ON. To cancel the feature demo, press and

hold VOLUME/MUTE. To restart the feature

demo, press and hold VOLUME/MUTE again.

Remember that if the feature demo continues

operating when the car engine is turned off, it

may drain battery power.

Important

The red lead (ACC) of this unit should be con-

nected to a terminal coupled with ignition switch

on/off operations. If this is not done, the vehicle

battery may be drained.

Before You Start

Section

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 95 96

Commentaires sur ces manuels

Pas de commentaire

Pioneer AVH-P4000DVD Manuel d'utilisateur Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Autoradio Pioneer AVH-P4000DVD