Pioneer HD1 Manuel d'opérations Page 83

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 192
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 82
81
NAVI Chapter 9 Modifying the General Settings for Navigation Functions
To clear values...
If you want to delete the learned results stored in
[Distance], [Speed Pulse] or [Learning Sta-
tus], touch the relevant result, then touch [Yes].
If you select [Learning Status], you can
select [Reset All] or [Reset Distance
Study]. To clear all learning statuses, touch
[Reset All]. To clear only the Distance study,
touch [Reset Distance Study].
Touch [Reset All] for the following cases:
When you changed the installation position
of the navigation system
When you changed the installation angle of
the navigation system
When you moved the navigation system to
another vehicle
When the distance accuracy is low, touch
[Reset Distance Study].
Touching [Reset All] returns the installation
angle setting also to the default or factory set-
ting. Reconfigure the setting.
“Correcting the installation angle” Page 81
The navigation system can automatically use
its sensor memory based on the outer dimen-
sions of the tyres.
Correcting the installation angle
You can correct the installation angle of the navi-
gation system. Correcting the installation angle
improves the accuracy of sensor learning, even if
the unit is not facing centre. Select the orienta-
tion of the LCD panel from the left, centre, and
right.
1 Touch [Settings] in the navigation menu,
then touch [Hardware].
2 Touch [Installation Angle Setup].
3 Check the direction the LCD panel faces,
and touch the corresponding item.
Left:
Select this when the angle is 5
° or more to the
left from the centre.
Centre (default):
Select this when the angle is less than 5
° to
the left, and less than 5
° to the right from the
centre.
Right:
Select this when the angle is 5
° or more to the
right from the centre.
If the [Learning Status] in the [3D Cali-
bration Status] is [Simple Hybrid], the
installation angle can be corrected.
Checking the device and version
information
1 Touch [Settings] in the navigation menu,
then touch [Hardware].
2 Touch [Service Info Screen].
3 Check the device and version information.
Checking the hard disk informa-
tion
You can check the volume of the hard disk, cur-
rent used space and remaining space.
The hard disk space (%) means a free space of
the music library. In some cases, even when
about 10% of free space is left, no more music
track may be recorded due to system restric-
tion.
MAN-HD1BT-SOFTW-EN.book Page 81 Thursday, April 20, 2006 3:47 PM
Vue de la page 82
1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 191 192

Commentaires sur ces manuels

Pas de commentaire