Pioneer AVIC N4 Manuel d'opérations télécharger pdf (Page 131)

129

Chapter 8 Customizing the AV Source SettingAV

2 Press the MENU button to change to the

AV MENU.

3 Touch “Initial”.

Setting the rear output and sub-

woofer controller

The navigation system’s rear output (rear speaker

leads output and RCA rear output) can be used

for full-range speaker (Rear SP Full) or sub-

woofer (Rear SP Sub. W) connection. If you

switch the rear output setting to the Rear SP

Sub. W, you can connect a rear speaker lead

directly to a subwoofer without using an auxiliary

amp.

Initially, the navigation system is set for rear full-

range speaker connection (Rear SP Full). When

rear output is connected to full range speakers

(when Rear SP Full is selected), you can con-

nect the RCA subwoofer output to a subwoofer.

In this case, you can select whether to use the

subwoofer controller’s (low pass filter, phase)

built-in Preout Sub. W or the auxiliary Preout

Full.

❒ When 5.1ch setting is “On”, the rear output

and subwoofer setting is not available.

1 Touch “Rear SP” in the Initial menu.

2 Touch “Rear SP” to switch the rear out-

put setting.

When no subwoofer is connected to the rear

output, select Full.

When a subwoofer is connected to the rear

output, select Sub. W.

❒ When the rear output setting is Sub. W,

you cannot change the subwoofer control-

ler.

3 Touch “Preout” to switch the subwoofer

output or non fading output.

❒ Even if you change this setting, there is no

output unless you turn “Non Fading” or

“Sub Woofer” in the Sound menu “On”.

➲ “Using non fading output” ➞ Page 125

➲ “Using subwoofer output” ➞ Page 125

❒ If you change the subwoofer controller

(Rear SP), the subwoofer output (Sub

Woofer) and non fading output (Non Fad-

ing) in the Sound menu return to the fac-

tory settings.

❒ Both rear speaker leads output and RCA

rear output are switched simultaneously in

this setting.

Editing the PIN code

You can edit the PIN code you like. Use this func-

tion when you need to change the PIN code from

the default setting.

1 Touch “PIN Edit” in the Initial menu.

2 Touch number key to enter the new PIN

code.

3 Touch “Enter” to fix the new PIN code.

❒ The default setting of the PIN code is 0000.

Switching the sound muting/

attenuation

Sound from this system is muted, attenuated or

mixed automatically in the following cases:

• When a call is made or received using a cellu-

lar phone connected to navigation system.

• When the voice guidance is output.

❒ The sound muting/attenuation function does

not work when you use a cellular phone con-

nected to the navigation system via the Blue-

tooth adapter, which is sold separately.

❒ When 5.1ch setting is “On”, the sound mut-

ing/attenuation setting is not available.

Version of the Bluetooth module

System (microprocessor) version

PIN code

Bluetooth Device (BD) address

Initial Settings

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 179 180

Commentaires sur ces manuels

Pas de commentaire

Pioneer AVIC N4 Manuel d'opérations Page 131

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de navigation pour voitures Pioneer AVIC N4