Pioneer AVIC 9 DVD Manuel d'opérations télécharger pdf (Page 19)

Chapter

Getting Started

Chapter

Getting Started

Setup 1: Preparing the Remote Control

You generally use the Remote Control to operate the Navigation System. Before using the

Remote Control, set the dipswitches and insert the batteries as described in the following sec-

tions.

■

Selecting dipswitches

When you remove the battery cover of the Remote Control, you will see the dipswitches as

shown in the following illustration. You can set each dipswitch using the tip of a ballpoint

pen.

Setting Switch 1

Set Switch 1 depending on the display used.

Setting Switch 2

Set switch 2 depending on the equipment’s volume which you alter the VOL dial.

Setting Switch 3

Set Switch 3 depending on the audio equipment used:

➲

Switch 4 is not to be used (It does not matter whether it is ON or OFF).

➲

Please set the switches correctly according to the combination of your equipment. Please

make sure that the setting is correct, otherwise the Navigation System will not work prop-

erly.

ON :

This is set if turning this on is recommended for a display used with this unit.

OFF :

When the following Pioneer displays are used for navigation display:

AVX-P7000CD, AVX-7000, AVD-W8000, AVD-W6000, AVD-W6010,

AVX-7300, AVX-P7300DVD

ON :

Volume of Pioneer Head Unit (including Pioneer AV master unit) is adjusted.

OFF :

Volume of the voice guidance of Navigation system is adjusted.

ON :

When combining with Pioneer AV master unit (AVM-P9000R, AVM-P8000R)

OFF :

When combining with Pioneer Head Unit with IP-BUS

When combining with AVM-P7000R

1234

OFF

CRB1654A_Eng.book Page 17 Thursday, September 20, 2001 4:30 PM

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 147 148

Commentaires sur ces manuels

Pas de commentaire

Pioneer AVIC 9 DVD Manuel d'opérations Page 19

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de navigation pour voitures Pioneer AVIC 9 DVD