Pioneer GM-D8400M Manuel d'utilisateur télécharger pdf (Page 5)

ENGLISH

ESPAÑOL

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

êìëëäàâ

Power Indicator (Blue)

The power indicator lights when the power is switched on.

BFC (Beat Frequency Control) Switch

If you hear a beat while listening to an MW/LW broadcast with your car stereo, change the

BFC switch using a small standard tip screwdriver.

LPF (Low-Pass-Filter) Cut Off Frequency Control

You can select a cut off frequency from 40 Hz to 240 Hz.

Bass Boost Control

You can adjust a bass boost level from 0 dB to 12 dB.

For instruction of connecting the bass boost remote control to the amplifier, see the

“Connection Diagram” section.

Input Switch

It is possible to input from a car stereo external output or a car stereo speaker output. Switch

the input switch before turning on the power. Since switching the input switch while the

power is on can cause a loud noise to be emitted from the speakers, the power is turned off

by a protection function. When using an external output, slide the switch to the right (RCA).

For connection instructions, see the “Connection Diagram” section. When using a speaker

output, slide the switch to the left (SP). In this case, it is necessary to use the supplied speak-

er input wire with RCA pin cord. For details, see the “Using the Speaker Input” section.

1 2 3 4 5 6 7 8 9 10 ... 85 86

Pas de commentaire

Pioneer GM-D8400M Manuel d'utilisateur Page 5