Pioneer FH-P80BT Manuel d'utilisateur télécharger pdf (Page 9)

9

English

Rubber bush

Double-ended screw

Screw (3 × 6 mm)

Dashboard

Installation

2. Install this unit and fasten the screws.

3. Attach the trim ring.

Installation using the screw

holes on the side of the unit

1. Remove the side brackets.

2. Fastening the unit to the factory

radio-mounting bracket.

Position the unit so that its screw holes are

aligned with the screw holes of the bracket,

and tighten the screws at 3 or 4 locations on

each side.

Note

In some types of vehicles, discrepancy may

occur between the unit and the dashboard. If this

happens, use the supplied frame to fill the gap.

Trim ring

Side bracket

Screw for fixing the side

bracket (5 × 8 mm)

Factory radio

mounting bracket

If the pawl gets in the way,

bend it down.

Dashboard or console

Binding screw or

flush surface screw

Be sure to use the

screws supplied

with this unit.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 71 72

Commentaires sur ces manuels

Pas de commentaire