Pioneer DEH-P90DAB Manuel d'utilisateur télécharger pdf (Page 57)

Subwoofer Setting Adjustment (Sub W-2)

When the Subwoofer output is ON, you can adjust the cut-off frequency and the output

level of Subwoofer.

Note:

• You can select the Subwoofer setting mode only when Subwoofer output is switched ON in the

Subwoofer ON/OFF mode.

Non-Fading Output (Non FadE

-1)

When the Non-Fading Output setting is ON, the audio signal does not pass through this

unit’s low pass filter (for the Subwoofer), but is output through the RCA output.

Note:

• When the Subwoofer Controller setting is only “Sub woofer control External”, you can switch the

Non-Fading Output ON/OFF mode. (Refer to page 66.)

2. Switch the Non-Fading output

ON/OFF with the 5/∞ but-

tons.

1. Press the AUDIO button and select the Non-Fading Output ON/OFF

mode (Non FadE-1) in the Audio Menu.

3. Increase or decrease the output

level with the 5/∞ buttons.

The display shows “+6” – “–6”.

2. Select the frequency to 50 Hz,

80 Hz or 125 Hz with the 2/3

buttons.

1. Press the AUDIO button and select the Subwoofer setting mode

(Sub W-2) in the Audio Menu.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS

ITALIANO NEDERLANDS

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 147 148

Pas de commentaire

Pioneer DEH-P90DAB Manuel d'utilisateur Page 57