Pioneer DEH-80PRS Manuel d'utilisateur télécharger pdf (Page 7)

Set up menu

When you turn the ignition switch to ON after

installation, set up menu appears on the dis-

play.

You can set up the menu options below.

1 After installation of this unit, turn the

ignition switch to ON.

SET UP appears.

2 Turn M.C. to switch to YES.

# If you do not operate for 30 seconds, the set

up menu will not be displayed.

# If you prefer not to set up at this time, turn

M.C. to switch to NO.

If you select NO, you cannot set up in the set up

menu.

3 Press M.C. to select.

4 Perform the following procedures to

set the menu.

To proceed to the next menu option, you need

to confirm your selection.

Language select (multi-language)

1 Turn M.C. to select the desired language.

English—Français—Italiano—Español—

Deutsch—Nederlands—РУССКИЙ

2 Press M.C. to confirm the selection.

Calendar (setting the date)

1 Turn M.C. to change the year.

2 Press M.C. to select day.

3 Turn M.C. to change the day.

4 Press M.C. to select month.

5 Turn M.C. to change the month.

6 Press M.C. to confirm the selection.

Clock (setting the clock)

1 Turn M.C. to adjust hour.

2 Press M.C. to select minute.

3 Turn M.C. to adjust minute.

4 Press M.C. to confirm the selection.

FM step (FM tuning step)

1 Turn M.C. to select the FM tuning step.

50kHz (50 kHz)—100kHz (100 kHz)

2 Press M.C. to confirm the selection.

Contrast (display contrast setting)

1 Turn M.C. to adjust the contrast level.

0 to 15 is displayed as the level is increased or de-

creased.

2 Press M.C. to confirm the selection.

Demonstration (demo display setting)

1 Turn M.C. to set the demo display to off.

2 Press M.C. to confirm the selection.

Quit appears.

5 To finish your settings, turn M.C. to se-

lect YES.

# If you prefer to change your setting again, turn

M.C. to switch to NO.

6 Press M.C. to select.

Notes

! Because demonstration mode is the function

for displaying at stores, do not use this func-

tion while driving.

! You can set up the menu options in the initial

settings. For details about the settings, refer to

Initial settings on page 34.

! You can cancel set up menu by pressing SRC/

OFF.

Basic operations

Important

! Handle gently when removing or attaching

the front panel.

! Avoid subjecting the front panel to excessive

shock.

! Keep the front panel out of direct sunlight and

high temperatures.

! To avoid damaging the device or vehicle inter-

ior, remove any cables and devices attached

to the front panel before detaching it.

En

7

Section

02

Operating this unit

Operating this unit

1 2 3 4 5 6 7 8 9 10 11 12 ... 51 52

Commentaires sur ces manuels

Pas de commentaire