Pioneer AVIC-F930BT Manuel d'utilisateur télécharger pdf (Page 22)

p The instructions in this section apply to

every model except AVIC-F8430BT.

Setting guidelines on the

rear view image

CAUTION

! When adjusting the guidelines, be sure to

park the vehicle in a safe place and apply the

handbrake.

! Before getting out of the car to place the

markings, be sure to turn the ignition switch

off (ACC OFF).

! The range projected by the rear view camera

is limited. Also, the vehicle width and distance

guidelines displayed on the rear view camera

image may differ from the actual vehicle

width and distance. (The guidelines are

straight lines.)

! The image quality may deteriorate depending

on the usage environment, such as at night or

in dark surroundings.

1 Park your vehicle in a safe place and

apply the handbrake.

2 Using packing tape or similar, place

markings approximately 25 cm from each

side of the vehicle, and approximately

50 cm and 2 m from the rear bumper.

Rear bumper

25cm

50cm

25cm

2m

Markings

Markings

3 Put the gearstick in reverse and display

the rear view camera screen.

4 Touch .

The screen for setting the guidelines appears.

# Each touch of turns the guidelines dis-

play on or off.

5 Touch or .

The screen for adjusting the points appears.

# If you touch [Clear], the display position of the

guidelines returns to the factory settings.

6 Touch or to select a point.

7 Touch , , or to adjust

the position of the point.

p When a point is moved, the distance from

the initial value is displayed at the top right

of the screen.

Engb

22

Chapter

07

Using the rear view camera functions

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire