Pioneer DVH-P4100UB Manuel d'utilisateur télécharger pdf (Page 67)

Understanding auto TA and EQ error messages

When correct measurement of car interior acoustic characteristics is not possible using the auto

TA and EQ, an error message may appear on the display. If an error message appears, refer to the

table below to see what the problem is and the suggested method of correcting the problem. After

checking, try again.

Message Cause Action

ERROR-MIC Microphone is not connected. Plug the supplied microphone securely into

the jack.

ERROR-FSP, ERROR-FLSP,

ERROR-FRSP, ERROR-CSP,

ERROR-RSP, ERROR-RLSP,

ERROR-RRSP, ERROR-SW

The microphone cannot pick up the

measuring tone of a speaker.

! Confirm that the speakers are connected

correctly.

! Correct the input level setting of the power

amp connected to the speakers.

! Set the microphone correctly.

ERROR-NOIS The surrounding noise level is too

high.

! Stop your car in a place that is as quiet as

possible, and switch off the engine, air condi-

tioner or heater.

! Set the microphone correctly.

Additional Information

Appendix

Additional Information

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 80 81

Pas de commentaire

Pioneer DVH-P4100UB Manuel d'utilisateur Page 67