Pioneer DEH-X55HD Manuel d'utilisateur télécharger pdf (Page 12)

5 Press M.C. to select the primary color.

R (red)—G (green)—B (blue)

6 Turn M.C. to adjust the brightness level.

Adjustment range: 0 to 60

# You cannot select a level below 20 for all three of

R (red), G (green), and B (blue) at the same time.

# You can also perform the same operation on

other colors.

Note

You cannot create a custom illumination color

while SCAN, WARM, AMBIENT or CALM is se-

lected.

About MIXTRAX

MIXTRAX technology is used to insert a variety

of sound effects in between songs, allowing you

to experience your music as a nonstop mix com-

plete with visual and lighting effects.

Notes

! Depending on the file/song, sound effects

may not be added.

! MIXTRAX includes a MIXTRAX flashing color

mode that when switched on turns the flash-

ing colors on and off in time with the audio

track. If you find the feature distracting while

driving, please turn MIXTRAX off. Refer to Op-

erations using the MIXTRAX button on page 7.

MIXTRAX menu

1 Press M.C. to display the main menu.

2 Turn M.C. to change the menu option

and press to select MIXTRAX.

3 Turn M.C. to select the MIXTRAX func-

tion.

Once selected, the following MIXTRAX functions

can be adjusted. The function is enabled when

MIXTRAX is on.

SHORT PLAYBACK (short playback mode)

You can select the length of the playback time.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

1.0 MIN (1.0 minute)—1.5 MIN (1.5 minutes)—

2.0 MIN (2.0 minutes)—2.5 MIN (2.5 minutes)

—3.0 MIN (3.0 minutes)—OFF (off)

! Turn this option OFF if you want to play a selec-

tion all the way through from start to finish.

FLASH AREA (flash area)

You can select areas for flashing colors.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

KEY/DISPLAY (key and display)—KEY (key)—

OFF (off)

! When OFF is selected, the color set under IL-

LUMI is used as the display color.

FLASH PATTERN (flash pattern)

You can select flashing color patterns.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

You can select any one of the options in the fol-

lowing list:

! SOUND LEVEL 1 to SOUND LEVEL 6 –

Flashing colors will flash on and off in syn-

chronization with the sound level in a

song. Select the desired mode.

! LOW PASS 1 to LOW PASS 6 – Flashing

colors will flash on and off in synchroniza-

tion with the bass level in a song. Select

the desired mode.

! RANDOM 1 – The pattern for the flashing

colors is randomly selected from the sound

level mode and low pass mode.

! RANDOM 2 – The pattern for the flashing

colors is randomly selected from the sound

level mode.

! RANDOM 3 – The pattern for the flashing

colors is randomly selected from the low

pass mode.

DISPLAY FX (display effect)

The MIXTRAX special effects display can be turned

on or off.

1 Press M.C. to select the desired setting.

ON (MIXTRAX special effects display)—OFF

(normal display)

CUT IN FX (manual cut-in effect)

You can turn on or off the MIXTRAX sound effects

while manually changing tracks.

1 Press M.C. to select the desired setting.

ON (on)—OFF (off)

Initial menu

1 Press and hold SRC/OFF until the unit

turns off.

2 Press and hold M.C. until the main menu

appears in the display.

3 Turn M.C. to change the menu option

and press to select INITIAL.

Once selected, the initial menu function below

can be adjusted.

SP-P/O MODE (rear output and preout setting)

The rear speaker leads output and the RCA output

of this unit can be used to connect a full-range

speaker or subwoofer. Select a suitable option for

your connection.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

You can select any one of the options in the fol-

lowing list:

! REAR/SUB.W – Select when there is a full-

range speaker connected to the rear speak-

er leads output and there is a subwoofer

connected to the RCA output.

! SUB.W/SUB.W – Select when there is a

subwoofer connected directly to the rear

speaker leads output without any auxiliary

amp and there is a subwoofer connected

to the RCA output.

! REAR/REAR – Select when there is a full-

range speaker connected to the rear speak-

er leads output and the RCA output.

If there is a full-range speaker connected to

the rear speaker leads output and the RCA

output is not used, you may select either

REAR/SUB.W or REAR/REAR.

System menu

1 Press and hold SRC/OFF until the unit

turns off.

2 Press and hold M.C. until the main menu

appears in the display.

3 Turn M.C. to change the menu option

and press to select SYSTEM.

4 Turn M.C. to select the system menu

function.

Once selected, the following system menu func-

tions can be adjusted.

For details, refer to System menu on the pre-

vious page.

Operating this unit

Section

Operating this unit

<QRD3126-B/N>12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 63 64

Commentaires sur ces manuels

Pas de commentaire

Pioneer DEH-X55HD Manuel d'utilisateur Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs de médias en voiture Pioneer DEH-X55HD