Pioneer DEH-P8XN Instructions d'exploitation télécharger pdf (Page 59)

Switching the Game Alert on or off

Once you made team selections, you need to

turn the Game Alert function on.

! The Game Alert function is on at the default

setting.

1 Display the function selection menu.

Refer to Introduction of advanced operations on

page 57.

2 Use MULTI-CONTROL to select

GAME ALERT in the function menu.

3 Press MULTI-CONTROL to turn the

Game Alert on.

The Game Alert function is now on.

# To turn the Game Alert function off, press

MULTI-CONTROL again.

When the game of the selected team

starts

When a game of the selected team is about to

start (or is currently playing) on a different sta-

tion, GAME ALERT is displayed. Press and

hold MULTI-CONTROL to switch to that sta-

tion, and you can listen to that game.

! If you do not operate the function within

about 10 seconds, the display is automati-

cally returned.

Displaying game information

If games of your selected teams are currently

playing, you can display information of the

games and tune to the broadcast channel.

You can display information of the games

while enjoying the sound from currently tun-

ing station. You can also tune to the broadcast

channel when you wish to.

1 Display the function selection menu.

Refer to Introduction of advanced operations on

page 57.

2 Use MULTI-CONTROL to select

GAME INFO in the function menu.

The game information of your selected team is

displayed.

3 Push MULTI-CONTROL up or down to

select a game.

The game is displayed, followed by more de-

tailed game information.

! Game score will be updated automatically.

4 Press MULTI-CONTROL to switch to that

station to listen to the game.

Notes

! If you have not made any team selections,

NOT SET is displayed.

! When games involving your favorite teams are

not currently playing, NO GAME is displayed.

Displaying the Radio ID

If you select CH 000, the ID code is displayed.

% Push MULTI-CONTROL left or right to

select CH 000.

Note

To select CH 000, set the channel select setting to

CH NUMBER. About the channel select setting,

refer to Selecting the SIRIUS channel select mode

on the previous page.

Using Instant Replay function

Following functions can be operated during

the Instant Replay mode.

! To use this function, Pioneer SIRIUS bus in-

terface (e.g. CD-SB10) is required.

! To use this function, SIRIUS plug-and-play

unit with Instant Replay Function is re-

quired.

! For details, refer to SIRIUS plug-and-play

unit’s manuals.

% Performing the Instant Replay mode

When SIRIUS tuner is selected as the source,

press and hold SAT MODE.

# In the following conditions, tuner exits from

the Instant Replay mode.

— When BAND/ESC is pressed

— When another source is selected

Available accessories

En

59

Section

06

Available accessories

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 76 77

Commentaires sur ces manuels

Pas de commentaire