Pioneer UDP-LX500 Manuel d'utilisateur télécharger pdf (Page 52)

No picture is displayed or

the picture is not

displayed properly.

Is the HDMI cable

properly connected?

• Connect the cable properly according to the connected

devices (page 16).

• Disconnect the cable, then reinsert it firmly and all the way in.

• TV or any other device which outputs video signals must be

connected to the HDMI OUT (MAIN) terminal (page 16).

Is the HDMI cable

damaged?

If the cable is damaged, replace it with a new one.

Is the input setting on the

connected TV or AV

receiver or amplifier

right?

Read the operating instructions for the connected

components and switch to the proper input.

Is the output video

resolution properly set?

Switch the resolution at which the video and audio are output

by pressing RESOLUTION e/r.

Depending on the HDMI

cable being used, high

resolution images of 4K

video and HDR video of

ULTRA HD Blu-ray

may

not be output.

To watch 4K video or HDR video of ULTRA HD Blu-ray

, use

an 18 Gbps-compatible Premium High Speed HDMI

cable

(optional).

Is a DVI device

connected?

The picture may not be displayed properly if a DVI device is

connected.

Is Color Space properly

set?

Change the Color Space setting (page 41).

Is the HDMI Mode set

appropriately?

Set the HDMI Mode to something other than Pure Audio

(page 41).

Is the DIRECT function set

to On?

Video output does not occur if the DIRECT function is set to

On. Turn the DIRECT function off to display video (page 29).

Playback stops. • Playback may stop if the unit is subject to shocks or set in an

unstable place.

• Playback may stop when a USB device is connected or

disconnected during playback. Do not connect or disconnect

USB devices during playback.

Picture freezes and the

front panel and remote

control buttons stop

working.

• Press g STOP to stop playback, then restart playback.

• If the playback cannot be stopped, press ^ STANDBY/ON on

the player’s front panel to turn off the power, then turn the

power back on.

• If the power cannot be turned off (to standby), reset the unit.

Press and hold the ^ STANDBY/ON button for approx. five

seconds. When the button indicator turns off, release your

finger. The unit restarts and can now be operated.

• It may not be possible to play scratched discs.

• Picture is stretched.

• Picture is cropped.

• Aspect ratio cannot be

switched.

Is the TV’s aspect ratio

properly set?

Read the operating instructions for the TV and set the TV’s

aspect ratio properly.

Is TV Screen properly set? Set TV Screen properly (page 39).

When video signals with a resolution of 4K60p, 4K50p, 4K24p,

1080/50i, 1080/50p, 720/50p, 1080/24p, 1080/60i, 1080/60p

or 720/60p are being output from the

HDMI OUT

terminal, they

may be output with an aspect ratio of 16:9 even if

TV Screen

set to

4:3 Pan&Scan

(page 39).

Picture is interrupted. The picture may be interrupted when the resolution of the

recorded video signal switches. Set Resolution to something

other than Auto (page 39).

There is square noise

(pixelation) on the screen.

Due to the characteristics of digital image compression

technology, block-shaped images may stand out, for example

in scenes where there is fast movement.

The subtitles cannot be

switched.

The subtitles cannot be switched for discs recorded on a DVD

or BD recorder.

Problem Check Remedy

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 63 64

Commentaires sur ces manuels

Pas de commentaire

Pioneer UDP-LX500 Manuel d'utilisateur Page 52

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de Blu-Ray Pioneer UDP-LX500