Pioneer BDP-320 Manuel d'utilisateur télécharger pdf (Page 35)

• Prog.Motion is disabled when Pure Cinema is set to

On.

• Black Setup has the effect only for pictures output

from the VIDEO output terminals.

• YNR, CNR, BNR and MNR have no effect on 1080/24p

video signals output from the HDMI OUT terminal.

 Closing the Video Adjust screen

Press HOME MENU.

 About Pure Cinema

There are two types of video signals:

• Video material – Video signals recorded at 30

frames/second

• Film material – Video signals recorded at 24 frames/

second

“Pure Cinema” uses signal processing suited for “film

material” when converting 480i or 1080i interlaced video

signals into progressive video signals, resulting in clear

picture reproduction without losing the quality of the

material.

is displayed on the disc information screen when

playing the “film material” pictures of BD-ROM, BD-R/-RE

and DVD-Video discs (page 26).

Adjusting the audio

Adjusting the Audio DRC

Audio DRC (Dynamic Range Control) has the effect of

playing loud sounds softly and soft sounds loudly. Adjust

the setting for example when viewing movies late at night

and the dialogs are difficult to hear.

1 During playback, display the TOOLS menu.

Press TOOLS.

2 Select and set Audio Adjust.

Use / to select, then press ENTER.

3 Select and set Audio DRC.

Use / to select, then press ENTER.

4 Adjust the setting.

Use / to switch between Off, Low, Medium, High

and Auto.

 Closing the Audio DRC screen

Press ENTER or HOME MENU.

Note

• This only affects the Dolby TrueHD, Dolby Digital Plus

and Dolby Digital audio signals of BDs and DVDs.

• When Auto is selected, the setting has the same

effect as High or Off for Dolby TrueHD signals,

depending on the content. For Dolby Digital Plus and

Dolby Digital, the setting has the same effect as Off.

• Audio DRC affects the audio signals output from the

following audio output terminals:

– Analog audio signals output from the AUDIO OUT

terminals.

–Linear PCM audio signals output from the DIGITAL

OUT terminal or HDMI OUT terminal.

• The effect may be weak for some discs.

Adjusting the output level of

the different speakers

during BD/DVD playback

(Channel Level)

Caution

• Channel Level of the speakers set to None or No at

Speaker Setup cannot be adjusted (page 42).

1 During playback, display the TOOLS menu.

Press TOOLS.

2 Select and set Audio Adjust.

Use / to select, then press ENTER.

3 Select and set Channel Level.

Use / to select, then press ENTER.

4 Adjust the output level.

Use / to select, / to adjust.

The output levels of the L, C, R, SL, SR, SBL, SBR and SW

speakers can be adjusted within the range of –6.0 dB to

+6.0 dB.

5 Press ENTER to set.

Note

•The adjustment of Channel Level is only applicable to

the sound output from AUDIO OUT.

• This cannot be adjusted when in the following cases:

– Output Terminal is set to HDMI or DI

GITAL

AUDIO (pa

ge 46).

– Audio Output Mode is set to 2 Channel

(page 38).

TOP MENU

TOOLS

HOME

RETURN

ENTER

SBR

SBL

0.0 dB

320_UXJCA_EN.book 35 ページ２００９年２月１３日　金曜日　午後４時２６分

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 65 66

Commentaires sur ces manuels

Pas de commentaire

Pioneer BDP-320 Manuel d'utilisateur Page 35

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de Blu-Ray Pioneer BDP-320