Pioneer VSX-D908TX-G Manuel d'utilisateur télécharger pdf (Page 26)

On Screen Display

There are a number of possible ways to hook up the receiver to your video components like a DVD player and

hook up to your receiver to your TV, but some of them will not allow you to use the on-screen display of this

unit. To avoid this one simply needs to follow two rules.

1 Always use the same type of video cords to hook up your video components to the receiver as you use to

hook up the receiver and your TV. For example, if you use composite video cords to hook up your DVD and

the receiver, use composite video cords to hook up the receiver to your TV. If you use S video cords to hook

up your DVD and the receiver, use S video cords to hook up the receiver to your TV.

2 Always make sure your TV is set to the appropriate input channel on your TV (for example, video 1). Your TV

may have a number of input channels and if you do not select the proper one you will not be able to use this

receiver’s on-screen display. If you are unsure how to choose an input channel for your TV, refer to the

manual which came with your TV.

You might, for example, use both composite and S video cords to hook up your video component with this

receiver and then use composite video cords to hook up this receiver to your TV. This arrangement would still

NOT let you see the on screen displays from this receiver on your TV. The best idea is just to use one type of

video cord for all your video component and TV hook ups.

Surround Sound Set Up

Switching video system between PAL and NTSC

This receiver is able to use two types of video systems for its OSD (on screen display) and you need to set the

receiver to the type of video system you have, either PAL or NTSC. If you do not match the system on the

receiver with your home system no OSD will appear on your TV. People with multi-system TVs, don’t need to

worry about changing the setting. If necessary, follow the instructions below to switch the type of video

system.

Put the receiver in STANDBY mode.

While holding down the LOUDNESS button press the

STANDBY/ON button. The video system type, either

”PAL“ on ”NTSC,“ appears in the display. It will be

shown for about seven seconds and then the receiver

reverts to normal operating mode.

Be careful to press the LOUDNESS button and NOT the DIRECT

button, which will accidentally clear all your speaker settings (see

warning p.29-30).

SIGNAL

SELECT

DIGITAL

VOLUME

SIGNAL

SELECT

DIGITAL

VOLUME

When using the PAL setting the OSD does not get displayed in

color.

when a PAL system is

selected

when a NTSC system is

selected

VSX-D938TX

wSTANDBY/ON

LOUDNESS

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 87 88

Commentaires sur ces manuels

Pas de commentaire

Pioneer VSX-D908TX-G Manuel d'utilisateur Page 26

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs AV Pioneer VSX-D908TX-G