Pioneer VSX-919AH-S Manuel d'utilisateur télécharger pdf (Page 81)

The Advanced MCACC menu 10

81

En

Manual MCACC setup

You can use the settings in the Manual

MCACC setup menu to make detailed

adjustments when you’re more familiar with

the system. Before making these settings, you

should have already completed Automatically

setting up for surround sound (Auto MCACC) on

page 37.

You only need to make these settings once

(unless you change the placement of your

current speaker system or add new speakers).

CAUTION

• The test tones used in the Manual MCACC

setup are output at high volume.

Important

• You will need to first specify the MCACC

preset you want to adjust by pressing

MCACC before pressing HOME MENU

(step 2 in Making receiver settings from the

Advanced MCACC menu on page 76).

•For some of the settings below, you’ll have

to connect the setup microphone to the

front panel and place it about ear level at

your norma

l

listening position. Press

HOME MENU to display the HOME MENU

before you connect the microphone to this

receiver. If the microphone is connected

while the HOME MENU is not being

displayed, the display will change to the

Full Auto MCACC under Advanced

MCACC.

• See Problems when using the Auto MCACC

Setup on page 40 for notes regarding high

background noise levels and other possible

interference.

•If you’re using a subwoofer, switch it on

and turn up the volume to the middle

position.

1 Select ‘

Manual MCACC

’ from the

Advanced MCACC

menu.

See Making receiver settings from the Advanced

MCACC menu on page 76 if you’re not already

at this screen.

2 Select the setting you want to adjust.

If you’re doing this for the first time, you might

want to make these settings in order.

• Fine Channel Level – Make fine

adjustments to the overall balance of your

speaker system (see Fine Channel Level on

page 82).

• Fine SP Distance – Make precise delay

settings for your speaker system (see Fine

Speaker Distance on page 82).

• Standing Wave – Control overly resonant

low frequencies in your listening room (see

Standing Wave on page 84).

The last two settings are specifically for

customizing the parameters explained in

Acoustic Calibration EQ Adjust on page 84:

• EQ Adjust – Manually adjust the frequency

balance of your speaker system while

listening to test tones (see Acoustic

Cali

brati

on EQ Adjust on page 84).

• EQ Professional – Calibrate your system

based on the direct sound coming from the

speakers and make detailed settings

according to your room’s r everb

characteristics (see Acoustic Calibration

EQ Professional on page 85).

a. Full Auto MCACC

b. Auto MCACC

c. Manual MCACC

d. Demo

1.Advanced MCACC

A/V RECEIVER

Exit Return

1. Fine Channel Level

2. Fine SP Distance

3. Standing Wave

1c.Manual MCACC

4. EQ Adjust

5. EQ Professional

A/V RECEIVER

Exit Return

VSX-1019_DF.book 81 ページ２００９年３月１３日　金曜日　午前９時５８分

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 121 122

Commentaires sur ces manuels

Pas de commentaire