Pioneer VSX-517-S/-K Manuel d'utilisateur télécharger pdf (Page 45)

The System Setup menu

English

Français

Deutsch

Nederlands

Italiano

Español

Adjust the level of each channel using

/

If you selected

T. TONE M.

, use

/

to switch

speakers.

The

T. TONE A.

setup outputs test tones in the

following order (depends on speaker settings):



SBR*



SBL*



VSX-817 model only

Adjust the level of each speaker as the test

tone is emitted.

Speaker Distance

For good sound depth and separation from

your system, you need to specify the distance

of your speakers from the listening position.

The receiver can then add the proper delay

needed for effective surround sound.

1 Select ‘SP DISTN.’ from the SP SETUP

menu.

2 Use

/

to choose the speaker that you

want then set the distance.

Use

/

to adjust the distance of each

speaker (in 0.1 meter increments).

The Input Assign menu

You only need to make settings in the Input

Assign menu if you didn’t hook up your digital

equipment according to the default settings for

the digital inputs, or if you didn’t hook up your

video equipment according to the default

settings for the component video inputs.

1 Select ‘IN ASSIG.’ from the System Setup

menu.

2 Use

/

to select the setting you want to

adjust then press

ENTER

•

DIG. IN

– See

Assigning the digital inputs

below.

•

COMP. IN*

– See

Assigning the

component video inputs

below.

VSX-817 model only

3 Press RETURN after making the

adjustments necessary for each setting.

Assigning the digital inputs

• Default settings:

COAX 1

(coaxial) –

DVD

COAX 2

(coaxial) –

DVR

OPT 1

(optical) –

VSX-817 model only

OPT2

(optical) –

You only need to do this if you didn’t connect

your digital components according to the

defaults above. This tells the receiver what

component is connected to which terminal so

it corresponds to the buttons on the remote.

1 Select DIG. IN from the IN ASSIG. menu.

2 Use

/

to select the number of the

digital input to which you’ve connected your

digital component.

The numbers correspond with the numbers

beside the inputs on the back of the receiver.

3 Select the component that corresponds

with the one you connected to that input.

• Use the

/

buttons and

ENTER

select

DVD

CDR

DVR

OFF

• If you assign a digital input to a certain

function (for example,

DVD

) then any

digital inputs previously assigned to that

function will automatically be switched

off.

Assigning the component video inputs

• Default settings:

COMP 1 – DVD

COMP 2 – TV

COMP 3 – DVR

Note

1• If you are using a Sound Pressure Level (SPL) meter, take the readings from your main listening position and adjust the level

of each speaker to 75 dB SPL (C-weighting/slow reading).

• The subwoofer test tone is output at low volumes. You may need to adjust the level after testing with an actual soundtrack.

• You can change the channel levels at any time by using EFFECT/CH SEL and +/– on the remote control. You can set two

channel levels: one for DVD 5.1 and one for the listening modes.

VSX517_817.fm 45 ページ２００７年２月２２日　木曜日　午後８時１１分

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 62 63

Commentaires sur ces manuels

Pas de commentaire

Pioneer VSX-517-S/-K Manuel d'utilisateur Page 45

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs AV Pioneer VSX-517-S/-K