Pioneer SC-LX801 Manuel d'utilisateur Page 112
- Page / 117
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
76
> Specifications > Settings > Listening Modes > Playback Function > Basic Manual
Troubleshooting | Appendix
Video
•
Confirm that the connection between the output jack on
the device and the input jack on this unit is correct.
•
Make sure that none of the connecting cables are bent,
twisted, or damaged.
•
When the TV image is blurry or unclear, power code or
connection cables of the unit may have interfered. In
that case, keep distance between TV antenna cable and
cables of the unit.
•
Make sure the switching of input screens is proper at
the monitor side such as a TV.
Check the following if the above does not fix the problem:
■ There is no video
•
Change the input selector on this unit to the position of
the terminal to which the player is connected.
■ There is no picture from a source connected to an
HDMI IN terminal�
•
To display video from the connected player on the TV
screen while the unit is in standby, you need to enable
"System Setup" - "Hardware" - "HDMI" - "HDMI Standby
Through" in the Home screen. Refer to "HDMI Setup" in
"Setup" in the Basic Manual for information about HDMI
Standby Through.
•
To output video to a TV connected to the HDMI OUT
SUB jack, in the "AV Adjust" menu displayed when
is
pressed on the remote controller select the HDMI OUT
jack for output in "Other" - "HDMI Out".
•
If you connect a player supporting HDCP2.2, be sure
to connect it to one of the HDMI IN1 to IN5 jacks of the
unit.
•
Check if "Resolution Error" is displayed on the main
unit display when video input via HDMI IN jack is not
displayed. In this case, the TV does not support the
resolution of the video input from the player. Change the
setting on the player.
•
Reliable operation with an HDMI-DVI adapter is not
guaranteed. In addition, video signals from a PC are not
supported.
■ Images flicker
•
It is possible that the resolution of the player is not
compatible with the TV's resolution. If you have
connected the player to this unit with an HDMI cable, try
changing the output resolution on the player. There also
may be an improvement if you change the screen mode
on the TV.
■ Video and audio are out of synch
•
Video may be delayed relative to audio depending on
the settings and connections with your television. To
adjust, press
on the remote controller, and adjust in
"Other" - "Sound Delay" in "AV Adjust".
Linked operation
■ There is no linked operation with CEC compliant
devices, such as a TV�
•
Set "System Setup" - "Hardware" - "HDMI" - "HDMI
CEC" in the Home screen of the unit to "On".
•
It is also necessary to set HDMI linking on the CEC
compliant device. Check the instruction manual.
•
When connecting a Sharp brand player or recorder
to the HDMI IN 1 to IN 5 jacks, set "System Setup" -
"Hardware" - "HDMI" - "HDMI Standby Through" in the
Home Menu to "Auto".
Tuner
■ Radio reception is poor or there is a lot of noise�
•
Re-check the antenna connection.
•
Relocate your antenna.
•
Move the unit away from your TV or PC.
•
Passing cars and airplanes can cause interference.
•
Concrete walls weaken radio signals.
•
Listen to the station in mono.
•
When listening to an AM station, operating the remote
controller may cause noise.
•
You can improve reception sensitivity by changing the
setting in "System Setup" - "Miscellaneous" - "Tuner"
- "AM Noise Cut Mode" in the Home screen if you are
finding AM broadcasts difficult to hear.
•
FM reception may become clearer if you use the
antenna jack on the wall used for the TV.
- SC-LX801 1
- SC-LX701 1
- What's in the box 2
- Glossary 2
- Step1: Speaker Layout 3
- Height Speakers; 4
- Front High Speakers/ 4
- Rear High Speakers 4
- Ceiling Speakers 5
- Dolby Enabled Speakers 6
- (Dolby Speakers) 6
- Speaker B System 7
- Bi-Amping the Speakers 8
- Speaker combinations 9
- Step2: Connect the Speakers 10
- With a Center Speaker 11
- With Surround Speakers 11
- With the Speaker B system 11
- Step3: Connect the TV 12
- TV-2 (Non-ARC TV) 13
- HDMI AV Components 14
- Non-HDMI AV Components 15
- Audio Components 16
- Component Video Monitor 17
- Step5: Multi-zone Connection 18
- ZONE 2 PRE/LINE OUT / 19
- ZONE 2 SPEAKER 19
- ZONE 3 PRE/LINE OUT / 20
- ZONE 3 SPEAKER 20
- Step6: Connect Other Cables 21
- 1. Full Auto MCACC 22
- HDMI Setup 23
- Basic Playback 24
- Network Functions 25
- BLUETOOTH 26
- Playback 26
- Listening To the Radio 27
- Multi-zone 27
- AV Adjust 28
- Front Panel 30
- Rear Panel 31
- DISCLAIMER 34
- *29402400B* 36
- Advanced 37
- Main features 38
- General Specifications 39
- About HDMI 42
- System Setup 43
- ■ HDMI Input 44
- ■ Video Input 45
- ■ Digital Audio Input 45
- ■ Analog Audio Input 46
- ■ Input Skip 46
- ■ Configuration 47
- ■ Crossover 49
- ■ Distance 51
- ■ Channel Level 52
- Audio Adjust 53
- ■ Volume 54
- ■ Input Volume Absorber 54
- ■ Name Edit 54
- ■ Audio Select 55
- Hardware 56
- ■ Power Management 58
- ■ 12V Trigger A 59
- ■ 12V Trigger B 61
- Multi Zone 64
- Miscellaneous 65
- ■ Preamp Mode 66
- ■ Firmware Update 66
- ■ Initial Setup 66
- MCACC Pro 67
- Manual MCACC 69
- ■ Fine Speaker Distance 70
- ■ Standing Wave 72
- ■ EQ Adjust 73
- ■ EQ Professional 76
- MCACC Data Check 77
- Data Management 78
- Network/Bluetooth 79
- Bluetooth 81
- ■ Other 83
- Control Function Settings 84
- Connecting a Power Amplifier 85
- Firmware Update 86
- Input/Output Assign 87
- Selecting Listening Modes 89
- Listening Mode Effects 90
- ■ Rock/Pop 92
- ■ Sports 92
- ■ Stereo 92
- ■ Unplugged 92
- Selectable Listening Modes 93
- AM/FM radio 99
- USB Storage Device 101
- ■ Supported Audio Formats 102
- Internet Radio 103
- ■ Playing Back 105
- ■ Notes for using multi-zone 105
- ■ Icons on the display 105
- Music Server 106
- ■ Setting PC 107
- ■ Remote playback 107
- Supported Audio Formats 108
- Troubleshooting 110
- Listening Modes 111
- Linked operation 112
- BLUETOOTH function 113
- Network function 113
- USB storage device 114
- Wireless LAN Network 114
- Multi-zone function 114
- Remote Controller 114
- Display, OSD 115
- Reference Information 116
- <Germany> 117
- <UK> 117
- <France> 117
- <U.S.A.> 117
Produits connexes et manuels pour Récepteurs AV Pioneer SC-LX801
(158 pages)
(130 pages)
(133 pages)
(153 pages)
(140 pages)
(72 pages)
(131 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.971 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels