Pioneer S-X360 Manuel d'utilisateur télécharger pdf (Page 24)

Surround sound settings

Chapter 7

Surround sound settings

Using the Setup menu

From the Setup menu you can access all the surround

sound settings of the system

, including channel levels,

speaker distances, dynamic range adjustment and dual

mono audio playback.

Use the following buttons to use the Setup menu.

Channel level setting

The Auto MCACC feature (see page 16) should give you

the best surround sound setup. However you may find

that by further adjustment of the channel levels you can

improve the surround sound in your listening room.

This method of setting the channel levels allows you to

listen to a source and adjust the levels of each playback

channel. Note that the channel level settings for stereo

playback are independent of the settings for surround

sound playback.

A further method of setting the channel levels is to use

the test tone method. See Adjusting the channel levels

using the test tone on page 25 for more on this.

1 Select stereo or multichannel playback for a source.

2 Press

SETUP

3 Use the

/

(cursor left/right) buttons to select

CH LEVEL

, then press

ENTER

4 Use

/

(cursor left/right) to select a channel;

/



(cursor up/down) to adjust the level of that channel.

• You can adjust the level of each channel by ± 10 dB.

• If the system is in Stereo or Virtual mode, or a stereo

source is playing in Auto mode, you will not be able

to adjust the center or surround channels.

5 Press

ENTER

when you’re finished.

• If you use the Auto MCACC feature again, it will

overwrite the settings you have made here.

Speaker distance setting

The Auto MCACC feature (see page 16) should give you

the best surround sound setup. However you may find

that by further adjustment of the speaker distance

settings you can improve the surround sound in your

listening room.

Set the distance of each speaker from your normal

listening position.

1 Press

SETUP

2 Use the

/

(cursor left/right) buttons to select

DISTANCE, then press

ENTER

3 Use

/

(cursor left/right) to select a speaker;

/



(cursor up/down) to adjust the distance.

Adjust the following speakers:

• L – Front left speaker

• C – Center speaker

• R – Front right speaker

• SR – Surround right speaker

• SL – Surround left speaker

• SW – Subwoofer

Each speaker can be adjusted from 0.3 m to 9.0 m.

4 Press

ENTER

when you’re finished.

• If you use the Auto MCACC feature again, it will

overwrite the settings you have made here.

Dynamic Range Control

When watching Dolby Digital or DTS material at low

volume, low level sounds—including some of the

dialog—can be difficult to hear properly. Using one of the

Dynamic Range Control (DRC) settings can help by

bringing up the low level sounds, while controlling high

level peaks.

Dynamic Range Control works only with Dolby Digital

soundtracks and some DTS soundtracks.

1 Press

SETUP

2 Use the

/

(cursor left/right) buttons to select

DRC, then press

ENTER

3 Use

/

(cursor up/down) to select a setting.

Select one of the following:

Note

1 There are other settings you can adjust from the Setup menu; these are explained in Listening to the radio on page 22 and Additional informa-

tion on page 29.

SETUP

MCACC

SURROUND

SOUND

INPUT CHANNEL

RDS DISP

AXD7442

VOLUME DISPLAY

JUKE BOX

TEST TONE VIDEO IN

ONE TOUCH COPY

/TUNE+

ENTER

/ /

TIMER REC REC MODE



/TUNE–

/ST– /ST+



––



B05_Setting_up_surround.fm 24 ページ２００６年５月９日　火曜日　午後４時４９分

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 34 35

Commentaires sur ces manuels

Pas de commentaire

Pioneer S-X360 Manuel d'utilisateur Page 24

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs AV Pioneer S-X360