Pioneer DDJ-SP1 Manuel d'utilisateur télécharger pdf (Page 11)

Advanced Operation

Using the Slicer function

The specified range is divided into eight equal sections, and these eight

sliced sections are assigned to the respective performance pads. While

one of the performance pads is pressed, the sound for the section

assigned to that pad is played in a loop.

While the sound for the section assigned to the pad is playing in a loop,

playback with the original rhythm continues in the background. When

the pad is released and loop playback stops, playback resumes from the

position reached in the background at that point.

! The slicer function cannot be used with tracks for which no beatgrid

is set. For details on setting beatgrids, see the Serato DJ software

manual.

1 Press the [SLICER] mode button.

The [SLICER] mode button lights and the mode switches to slicer mode 1.

2 Press the [SLICER] mode button to select the slicer

mode.

The mode switches between slicer mode 1 and slicer mode 2 each time

the button is pressed.

= About slicer mode 1 and slicer mode 2 (p.11)

3 Press the [PARAM.1/PARAM.2c] or [PARAM.1/

PARAM.2d] button while pressing the [SHIFT] button.

Set the domain for the slicer function. The value set for the domain

switches each time one of the buttons is pressed while pressing the

[SHIFT] button.

The domain can be set to one of six settings: 2 beats, 4 beats, 8 beats, 16

beats, 32 beats or 64 beats.

The eight equal sections into which the range specified with the domain

setting have been sliced are assigned to the respective performance

pads as shown below.

Sliced sections 1 to 8

Domain

1234 56

Section1 Section2 Section3 Section4

Section5 Section6 Section7 Section8

4 Press the [PARAM.1/PARAM.2c] or [PARAM.1/

PARAM.2d] button.

Set the quantization for the slicer function. The value set for the quanti-

zation switches each time one of the buttons is pressed.

The quantization can be set in four ways: 1/8, 1/4, 1/2 and 1.

The length of the loop which is played while the pad is being pressed

can be changed with the “QUANTIZATION” setting. For example, when

“QUANTIZATION” is set to “1”, the entire section assigned to the pad is

played in a loop, and when “QUANTIZATION” is set to “1/2”, only the first

half of the section assigned to the pad is played in a loop.

5 Press and hold one of the performance pads.

When the pad is pressed and held, the sound is played in a loop.

! The length of loop playback differs depending on the quantization

setting.

When the pad is released, the track returns to the position that is playing

in the background.

 About slicer mode 1 and slicer mode 2

Slicer mode 1

When the playback position advances to the end of the range that has

been sliced into eight equal sections, the range shown on the display

switches to the next eight sliced sections, and these sliced sections

are assigned to the respective pads, replacing the previously assigned

sections.

12345678

…

345678

Slicer mode 2

When the playback position advances to the end of the range that was

sliced into eight equal parts, the playback position returns to the begin-

ning of the range that was sliced into eight equal parts.

12345678

Using the sampler function

Tracks loaded in the sampler slots of the sampler (SP-6) can be played

with the performance pads.

1 Press the left or right [DECK] button while pressing

the [SHIFT] button to open the [SP-6] panel on the

computer’s screen.

2 Press the [SAMPLER] mode button.

The [SAMPLER] mode button lights and the mode switches to the sam-

pler mode.

3 Press the [PARAM.1/PARAM.2c] or [PARAM.1/

PARAM.2d] button.

Switch the sampler (SP-6) bank. The sampler has four banks, A, B, C and D,

and each bank has six slots.

4 Select the track from the library on the computer’s

screen, then press a performance pad while pressing the

[SHIFT] button.

The selected track is loaded into the sample slot.

With the Serato DJ software, when a track is loaded into the sampler

slot, that setting is held.

5 Press a performance pad.

The sound for the slot assigned to the pad that was pressed is played.

Slot1 Slot2 Slot3 Slot4

Slot5 Slot6

! When a performance pad is pressed while pressing the [SHIFT]

button, the sound of the slot that is currently playing stops.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Pioneer DDJ-SP1 Manuel d'utilisateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Audio Pioneer DDJ-SP1