Pioneer VSX-72TXV Manuel d'utilisateur télécharger pdf (Page 28)

Listening to your system

Listening in stereo

When you select STEREO, you will hear the source

through just the front left and right speakers (and

possibly your subwoofer depending on your speaker

settings). Dolby Digital and DTS multichannel sources

are downmixed to stereo.

• While listening to a source, press

STEREO

for stereo

playback.

Using Stream Direct

Use the Stream Direct modes when you want to hear the

truest possible reproduction of a source. All unnecessary

signal processing is bypassed, and you’re left with the

pure analog or digital sound source (see Stream direct

with different input signal formats on page 85).

1 While listening to a source, press S.DIRECT

(

AUTO SURR

STREAM DIRECT

)

to select the mode

you want.

Check the digital format indicators in the front panel

display to see how the source is being processed.

• AUTO SURROUND – See Auto playback on page 26.

• DIRECT – Sources are heard according to the

settings made in the Surround Setup (speaker

setting, channel level, speaker distance, acoustic

calibration EQ, and X-curve), as well as with dual

mono, the input attenuator, and any sound delay and

hi-bit/hi-sampling settings. You will hear sources

according to the number of channels in the signal.

• PURE DIRECT – Analog and PCM sources are heard

without any digital processing.

No sound is output

from the Second Zone in this mode.

Selecting MCACC presets

• Default setting: MEMORY 1

If you have calibrated your system for different listening

positions

, you can switch between settings to suit the

kind of source you’re listening to and where you’re sitting

(for example, watching movies from a sofa, or playing a

video game close to the TV).

• While listening to a source, press

MCACC

(

MCACC

POSITION

Press repeatedly to select one of the six MCACC presets

or to switch calibration off. See Data Management on

page 40 to check and manage your current settings.

Choosing the input signal

You need to hook up a component to both analog and

digital inputs on the receiver to select between input

signals.

• Press

SIGNAL SEL (SIGNAL SELECT

) to select the

input signal corresponding to the source component.

Each press cycles through the options as follows:

• AUTO – This is the default setting. The receiver

selects the first available signal in the following

order: ; HDMI; DIGITAL; ANALOG.

• ANALOG – Selects an analog signal.

• DIGITAL – Selects an optical or coaxial digital signal.

• HDMI – Selects an HDMI signal.

• – Selects an i.LINK signal (VSX-74TXVi only).

Note

1 There are cases where a brief noise is heard before playback of sources other than PCM. Please select AUTO SURROUND or DIRECT if this is a problem.

SHIFT

STATUS

MCACC S.DIRECT

MULTI OPE

SIGNAL SEL

SBch

STEREO

ADV. SURR

STANDARD

PHASE

THX

SHIFT

STATUS

MCACC S.DIRECT

MULTI OPE

SIGNAL SEL

SBch

STEREO

ADV. SURR

STANDARD

PHASE

THX

2 Different presets might also have separate calibration settings for the same listening position, depending on how you’re using your system. These pre-

sets can be set in Automatically setting up for surround sound (MCACC) on page 7 or Automatic MCACC (Expert) on page 32, either of which you should

have already completed.

3 You can’t use these settings when MULTI CH IN is switched on, and they has no effect when headphones are connected.

4 • This receiver can only play back Dolby Digital, PCM (32kHz–96 kHz), DTS (including DTS 96kHz/24 bit) and WMA9 Pro digital signal formats. With other

digital signal formats, set to ANALOG (the MULTI CH IN, TUNER and iPod input functions are all fixed to ANALOG).

• You may get digital noise when a LD or CD player compatible with DTS is playing an analog signal. To prevent noise, make the proper digital connec-

tions (page 15) and set the signal input to DIGITAL.

• Some DVD players don’t output DTS signals. For more details, refer to the instruction manual supplied with your DVD player.

• Even when i.LINK is selected and the i.LINK indicator lights, you won’t hear any sound if the output settings of your i.LINK device are off.

• The input signal for unassigned i.LINK-equipped components is fixed to . See Checking the i.LINK inputs on page 50.

5 When the HDMI option in Setting the AV options on page 64 is set to THROUGH, the sound will be heard through your TV, not from this receiver.

SHIFT

STATUS

MCACC S.DIRECT

MULTI OPE

SIGNAL SEL

SBch

STEREO

ADV. SURR

STANDARD

PHASE

THX

SHIFT

STATUS

MCACC S.DIRECT

MULTI OPE

SIGNAL SEL

SBch

STEREO

ADV. SURR

STANDARD

PHASE

THX

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 87 88

Commentaires sur ces manuels

Pas de commentaire

Pioneer VSX-72TXV Manuel d'utilisateur Page 28

Commentaires sur ces manuels

Produits connexes et manuels pour Acoustique Pioneer VSX-72TXV