Pioneer RMF-V4011R Manuel d'utilisateur télécharger pdf (Page 57)

(10) Attach the adjuster (BEF1011) attached with a nut

(M8) to the rear holders R and L (BNG1205, 1206).

(

)Attach each rear panel (BMR1069, 1070, 1071, 1072) to

the unit and the rear holders R and L using the screws

(3 × 8). Furthermore, to cover up the gap at the top of

the projection unit, paste the hinder panel (BMR1075)

over the top board and projection unit.

[After Completion]

INSTALLATION AND ASSEMBLY

4' Mounting the Projection Cabinet (RMF-V4011R)

Projection cabinet can mount to use the conventional method. For details, refer to the RM-V2000A technical manual.

(

)While tilting the parts assembled at step 10, insert it

into the holes on the shoulder of the multi-projection

unit and attach with the screws (3 × 12). (2 screws × 2

locations). Furthermore, pull up the adjuster to the top

of the unit while rotating it, and pull down the nut to

the rear holders R and L while rotating it to secure the

projection unit.

* Tighten the nuts tightly.

Adjuster

(BEF1011)

nut

(M8)

Hinder panel

(BMR1075)

Rear panel L (upper)

(BMR1070)

Rear panel L (lower)

(BMR1072)

screws

(M3 × 12)

Screw : M3 × 8

Rear holder L

(BNG1205)

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 141 142

Pas de commentaire

Pioneer RMF-V4011R Manuel d'utilisateur Page 57