Pioneer RM-V1000NU Manuel d'utilisateur télécharger pdf (Page 120)

119

APPENDIX (MVP manual)

Tint Adjustment [TNT command]

Input : TNTd1d2d3

Explanation: Corrects the tint of the NTSC input board.

1d2d3 : Compensation value 0 to 255

TNT?

: Help display

TNT

: Displays the current value and moves to the sub command mode

• To execute this command, it is necessary to set the adjustment mode by AJYB. (Refer to the

AJYB command.)

• If data input is skipped, the sub command input mode is set after the data is displayed.

The sub command mode is the same as with the COL command.

• The changed value is memorized the last.

(Example) TNT

Indicates the current tint value.

128

Controls the Panel Switch Function

To Set the Manual Mode [MNL command]

To Set the Remote Mode [RMT command]

Input : MNL , RMT

Explanation :• Manual mode : Makes the following switch functions effective.

1 GEN LOCK INT/EXT switch

2 Optional RGB board FILTER ON/OFF switch

3 VBS/ Y/C select switch

4 MODE switch (The RESET button is required.)

The manual mode is set at POWER ON (or RESET button).

• Remote mode : Mode in which the above switching setting are selected via the RS-232C line.

In this case, the above switch states are ignored.

The settings which can be switched by the remote mode are as follows.

• External sync, internal sync switching

Refer to the EXT and INT commands

• Optional RGB board FILTER ON/OFF switching

Refer to the DSY and DSN commands (RMD-V3020)

• V IN (Composite video/YC separate) switching

Refer to the CIB and YIB commands.

• V OUT output format (MODE) switching

Refer to NT, NTR, NTD commands.

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 158 159

Pas de commentaire

Pioneer RM-V1000NU Manuel d'utilisateur Page 120