Pioneer SCSI-2 Manuel d'utilisateur Page 26
- Page / 189
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Audio Scan (1)
- 13 -
2.1 Audio Scan (1) (CDh)
When AUDIO SCAN (1) is executed, the drive begins a high-speed scan from the Scan Start
Address. The drive plays a block as it crosses each track. Each scan is approximately 15 seconds.
When the specified search address is found, GOOD status is returned.
If the drive is not ready or if the Scan Start Address is not on an audio track, Check Condition
status is returned.
During an audio scan, the drive can receive and execute the following SCSI commands without
scan termination:
AUDIO PLAY (StpAdr=1), AUDIO STATUS, AUDIO STOP
INQUIRY
MODE SELECT, MODE SENSE
READ BUFFER, WRITE BUFFER
READ CD-ROM CAPACITY, READ SUB CHANNEL, READ TOC
RECEIVE DIAGNOSTIC RESULTS, REQUEST SENSE, TEST UNIT READY
RELEASE, RESERVE
There are several commands that when received by the drive during an audio scan, the drive will
terminate the scan and execute the received command. The commands are:
PLAY AUDIO (StpAdr=0), AUDIO SCAN, PLAY AUDIO TRACK
PAUSE/RESUME
READ, SEEK, VERIFY
READ HEADER
START/STOP UNIT, REZERO UNIT
SEND DIAGNSTICS
PREVENT/ALLOW MEDIA REMOVAL
Operation Code is (CDh).
Direct
is “0” (FALSE) when the drive scans forward.
is “1” (TRUE) when the drive scans backwards.
Scan Start Address contains the address at which the audio scan is to begin.
- SCSI-2 Command Set 1
- Table of Contents 5
- LIST OF TABLES 8
- REVISION HISTORY 12
- 1. PREFACE 13
- 1.1 DRM/DR-U Series 13
- 1.3 SCSI Protocol 16
- 1.3.3 Status Phase 17
- TABLE 1-5 SAMPLE COMMAND 18
- 1.5 Sample Command 19
- Applied Model Sense Data 21
- Command Name Code 21
- 2. COMMANDS 22
- Commands 24
- TABLE 2-1 AUDIO SCAN (1) 25
- 2.1 Audio Scan (1) (CDh) 26
- Audio Scan (1) 28
- TABLE 2-2 AUDIO SCAN (2) 29
- 2.2 Audio Scan (2) (BAh) 30
- TABLE 2-3 CHANGE DEFINITION 31
- 2.3 Change Definition (40h) 32
- TABLE 2-4 INQUIRY 33
- 2.4 Inquiry (12h) 34
- 2.5 Mode Select(6) (15h) 38
- ABLE 2-5B BLOCK DESCRIPTOR 39
- ABLE 2-5C PAGE DESCRIPTOR 39
- Mode Select(6) 40
- 2.6 Mode Select(10) (55h) 42
- ABLE 2-7 MODE SENSE(6) (1AH) 43
- ABLE 2-7B BLOCK DESCRIPTOR 43
- 2.7 Mode Sense(6) (1Ah) 44
- ABLE 2-7C MEDIA TYPE CODE 45
- Mode Sense(6) 46
- 2.8 Mode Sense(10) (5Ah) 48
- ABLE 2-9B MODE PAGE FORMAT 49
- Mode Select/Sense Parameters 50
- Error Recovery Parameters 52
- Verify Error Recovery Page 58
- 2.9.3 Peripheral Device Page 60
- Medium Types Supported Page 62
- 2.9.5 CD-ROM Parameters Page 64
- AGE FORMAT 67
- 2.9.8 Drive Speed Page 74
- Logical Unit Assignment Page 76
- ABLE 2-10 PAUSE/RESUME (4BH) 77
- 2.10 Pause/Resume (4Bh) 78
- 2.11 Play Audio(10) (45h) 80
- 2.12 Play Audio(12) (A5h) 82
- 2.13 Play Audio MSF (47h) 84
- Play Audio Track Index 86
- Play Audio Track Relative(10) 88
- Play Audio Track Relative(12) 90
- Prevent/Allow Media Removal 92
- TABLE 2-18 READ(6) (08H) 93
- 2.18 Read(6) (08h) 94
- TABLE 2-19 READ(10) 95
- 2.19 Read(10) 96
- TABLE 2-20 READ BUFFER (3CH) 97
- 2.20 Read Buffer (3Ch) 98
- ABLE 2-21A READ CAPACITY DATA 99
- Read CD-ROM Capacity 100
- TABLE 2-22 READ CD (BEH) 101
- 2.22 Read CD (BEh) 102
- TABLE 2-23 READ CD MSF (B9H) 107
- 2.23 Read CD MSF (B9h) 108
- TABLE 2-24 READ CDP (E4H) 109
- 2.24 Read CDP (E4h) 110
- ABLE 2-25A PAGE HEADER 111
- 2.25 Read Drive Status (E0h) 112
- Read CDP 114
- TABLE 2-26 READ HEADER (44H) 115
- 2.26 Read Header (44h) 116
- 2.27 Read Sub-Channel (42h) 118
- ABLE 2-27C AUDIO STATUS 119
- Read Sub-Channel 120
- TABLE 2-28 READ TOC (43H) 125
- 2.28 Read TOC (43h) 126
- ABLE 2-28D TRACK DESCRIPTORS 127
- Read TOC 128
- ABLE 2-28F TRACK DESCRIPTORS 129
- Read Diagnostic Results 132
- TABLE 2-30 RELEASE (17H) 133
- 2.30 Release (17h) 134
- ABLE 2-31 REQUEST SENSE (03H) 135
- 2.31 Request Sense (03h) 136
- CONTINUED 138
- Request Sense 140
- TABLE 2-32 RESERVE (16H) 141
- 2.32 Reserve (16h) 142
- TABLE 2-33 REZERO UNIT (01H) 143
- 2.33 Rezero Unit (01h) 144
- TABLE 2-34 SEEK(6) (0BH) 145
- 2.34 Seek(6) 146
- TABLE 2-35 SEEK(10) (2BH) 147
- 2.35 Seek(10) (2Bh) 148
- 2.36 Send Diagnostic (1Dh) 150
- Set CD-ROM Speed(1) 152
- Set CD-ROM Speed(2) 154
- 2.39 Start/Stop Unit (1Bh) 156
- 2.40 Stop Play/Scan (4Eh) 158
- 2.41 Test Unit Ready (00h) 160
- TABLE 2-42 VERIFY(10) (2FH) 161
- 2.42 Verify(10) (2Fh) 162
- TABLE 2-43 VERIFY(12) (AFH) 163
- 2.43 Verify(12) (AFh) 164
- TABLE 2-44 WRITE BUFFER (3BH) 165
- 2.44 Write Buffer (3Bh) 166
- TABLE 2-45 WRITE CDP (E3H) 167
- 2.45 Write CDP (E3h) 168
- TABLE 2-46 READ CD-DA (D8H) 169
- 2.46 Read CD-DA (D8h) 170
- Read CD-DA 172
- 2.47 Read CD-DA MSF (D9h) 174
- TABLE 2-48 READ CD-XA (DBH) 175
- 2.48 READ CD-XA (DBh) 176
- 2.49 Read All SubCode (DFh) 178
- Appendix A 179
- Appendix B 180
- Blocks PL: Begin Play 183
- Appendix C 184
- Appendix D 185
- CD-ROM SCSI-2 Command Set 189
© 2020, manymanuals.fr. Tous droits réservés | 0.431 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels