Pioneer Z110 Manuel d'opérations télécharger pdf (Page 164)

— When the navigation outputs the gui-

dance voice.

— When you use a cellular phone via Blue-

tooth technology (dialing, talking, in-

coming call).

— When the voice recognition mode is ac-

tivated.

! Tel/VR — The volume is muted or attenu-

ated according to the following conditions

— When you use a cellular phone via Blue-

tooth technology (dialing, talking, in-

coming call).

— When the voice recognition mode is ac-

tivated.

! Off — The volume does not change

p AV source volume returns to normal when

the corresponding action is ended.

Switching the muting/

attenuation level

You can select the muting/attenuation level of

[Mute]. This setting is also effective for a mute

signal that has been received from the MUTE

lead connected to the navigation unit.

p This menu is not available when AV source

is [Off].

% Touch [Mute Level] on the “AV System

Settings” menu.

Each touch of [Mute Level] changes the set-

tings as follows:

! 20dB — The volume becomes 1/10

! 10dB — The volume becomes 1/3

! All — The volume becomes 0

p When you select [All], no audio adjust-

ments are possible during the sound is

turned off.

p When you select [20dB]or[10dB], no audio

adjustments are possible during the sound

is attenuated.

p AV source volume returns to normal when

the corresponding action is ended.

p Even when a mute signal has been received

from MUTE lead connected to the naviga-

tion unit, navigation voice guidance cannot

be attenuated or muted.

Changing the voice output of

the navigation guidance

You can set the speaker to output the naviga-

tion guidance and phone voice, etc.

% Touch [Guidance/Tel SP] on the “AV Sys-

tem Settings” menu.

Each touch of [Guidance/Tel SP] changes the

settings as follows:

! L+R SP — Uses both the front right and left

speakers

! Left SP — Uses only the front left speaker

! Right SP — Uses only the front right speak-

er

Acquiring/Cataloging iPod

music information

If you always set the language other than “US

English” on “Voice Language”, this setting is

unnecessary.

Unless [VR Catalog Mode] is turned off, this

navigation system tries to acquire the informa-

tion needed to operate iPod with voice com-

mands. It may take a short period of time to

transfer the information. Change the setting

according to your usage.

The navigation system starts acquiring/catalo-

ging music information (1) when the iPod is

connected or when the system boots up while

the iPod is connected and (2) when iPod is the

selected and displayed AV Source, unless [VR

Catalog Mode] is turned off.

p This function is available when [Change

Control Mode] is set to [Navi].

p If you do not use iPod, this setting is un-

necessary.

p During transfer, iPod operations (such as

[Shuffle], [MENU], or [Video]) are not

available.

En

164

Chapter

32

Customizing preferences

1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 215 216

Commentaires sur ces manuels

Pas de commentaire