Pioneer N-50 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Non Pioneer N-50. Pioneer N-50 Benutzerhandbuch Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
To first-time users
In order to familiarize first-time users of this unit with particularly important
features and functions, the following information has been abstracted from
the main Operating Instructions.
We strongly urge you to read and understand these points before attempting
to operate the unit.
Startup time required when turning power on
Press the
/I
STANDBY/ON
button on the front panel.
The unit turns on.
The button’s central power indicator will flash slowly.
About twenty seconds after turning on the power, the following screen appears.
About one minute is required between turning the power on and completion of
startup.
Setting Quick Start Mode to On will allow faster startup. For details, see
Changing the Quick Start Mode on Operating Instructions.
Important
The unit’s controls will not respond during the approximate one minute required
until startup is completed.
Playing music via a USB connection to a computer
N-50 only
Important note regarding the use of a USB connection between this unit and a
computer in order to play music files located on the computer.
When using this connection to input audio files from a computer to this unit, it
may be necessary to install a special driver on the computer. For details, see the
website of Pioneer.
A l’intention des
utilisateurs novices
Pour permettre aux utilisateurs novices de se familiariser avec les caractéris-
tiques et les fonctions particuliérement importantes de cet appareil, les infor-
mations suivantes ont été extraites du Mode d’emploi principal.
Nous vous conseillons vivement de lire et de comprendre ces points avant d’es-
sayer d’utiliser l’appareil.
Durée de mise en marche après la mise sous tension
Appuyez sur le bouton
/I
STANDBY/ON
du panneau avant.
L’appareil est mis sous tension.
Le voyant central du bouton clignote lentement.
Environ 20 secondes après la mise sous tension, l’écran suivant apparaît.
Environ une minute est nécessaire entre la mise sous tension et la fin de la
phase de démarrage.
Le fait de régler Quick Start Mode sur On (activé) permettra une mise en
marche plus rapide. Pour plus d’informations, consultez la section Changement
du mode Quick Start dans le mode d’emploi.
Important
Les commandes de l’appareil n’agiront pas pendant une minute environ, durée
requise pour effectuer la mise en marche.
Lecture de musique via une connexion USB à un
ordinateur
N-50 seulement
Remarque importante relative à l’emploi d’une connexion USB entre cet appareil et
un ordinateur pour lire des fichiers musicaux mémorisés sur l’ordinateur.
Lorsque vous utilisez cette connexion pour fournir des fichiers audio d’un ordinateur
vers cet appareil, l’installation d’un pilote de périphérique spécial sur l’ordinateur
peut s’avérer nécessaire. Pour des détails, consultez le site web de Pioneer.
Für den erstmaligen
Benutzer
Die nachstehenden Informationen wurden der Bedienungsanleitung zu dem
Zweck entnommen, den erstmaligen Benutzer dieses Gerätes mit den wichtig-
sten Merkmalen und Funktionen vertraut zu machen.
Es wird dringend angeraten, die folgenden Hinweise vor der Inbetriebnahme
des Gerätes aufmerksam durchzulesen.
Nach dem Einschalten der Stromzufuhr zum Hochfahren
erforderliche Zeit
Drücken Sie den Schalter
/I STANDBY/ON
an der Frontplatte.
Das Gerät schaltet sich ein.
Die LED in der Mitte des Schalters blinkt in langsamem Tempo.
Etwa 20 Sekunden nach dem Einschalten des Gerätes erscheint der
nachstehend a/jointfilesconvert/531436/bgebildete Bildschirm. Der Vorgang des Hochfahrens nach dem
Einschalten beansprucht ca. eine Minute.
Das Hochfahren des Gerätes kann beschleunigt werden, indem die Funktion
Quick
Start Mode
(Schnellstart-Modus) aktiviert (
On
) wird. Einzelheiten hierzu finden Sie
im Abschnitt
Einstellen des Schnellstart-Modus
in der Bedienungsanleitung
.
Wichtig
Die Bedienelemente des Gerätes sind ca. 1 Minute lang nicht funktionsfähig, bis
das Hochfahren a/jointfilesconvert/531436/bgeschlossen ist.
Wiedergabe von Musik über einen USB-Anschluss an
einen Personalcomputer
Nur N-50
Wichtiger Hinweis zur Verwendung eines USB-Anschlusses zwischen diesem Gerät
und einem PC zur Wiedergabe von Musikdateien, die auf dem PC a/jointfilesconvert/531436/bgespeichert sind.
Bei Verwendung dieses Anschlusses zur Eingabe von Audiodateien von einem
PC an dieses Gerät kann die Installation eines Spezialtreibers auf dem PC
erforderlich sein. Einzelheiten hierzu finden Sie auf der Pioneer-Website.
Per l’utente inesperto
Per permettere agli utenti inesperti di familiarizzarsi con caratteristiche e fun-
zioni particolarmente importanti di quest’unità, le informazioni che seguono
sono state estratte ed isolate dal resto delle Istruzioni per l’uso.
Consigliamo caldamente di leggere e capire bene questi punti prima di tentare
di fare uso di questa unità.
Tempo richiesto per l’accensione dell’unità
Premere il pulsante
/I STANDBY/ON
del pannello anteriore.
L’unità si accende.
L’indicatore di alimentazione centrale del pulsante lampeggia lentamente.
Circa venti secondi dopo aver acceso il sistema appare la seguente schermata.
Dall’accensione al completarsi dell’avvio trascorre circa un minuto.
Impostando Quick Start Mode (Modalità di avvio veloce) su On l’avvio sarà
più rapido. Per dettagli, consultare la sezione Cambio di Quick Start Mode delle
Istruzioni per l’uso.
Importante
I comandi di questa unità non rispondono durante il minuto circa richiesto per
il completamento del suo avvio.
Riproduzione di musica via collegamento USB ad un
computer
Solo N-50
Nota importante riguardante il collegamento USB di questa unità ad un
computer per riprodurre file musicali memorizzate in quest’ultimo.
Se si usa questo collegamento per ricevere file audio da un computer in questa
unità, potrebbe essere necessario installare un driver nel computer. Per dettagli,
vedere il sito Web di Pioneer.
/I STANDBY/ON
STANDBY
iPod/USB
5V 2.1A
PURE AUDIO Hi-Bit32
Power indicator
AL OUT
COAXIAL OPTICAL COAXIAL
12
DIGITAL IN
DIGITAL IN
ADAPTER PORT
DC OUTPUT
for WIRELESS LAN
USB
(OUTPUT 5V
0.1A MAX)
(OUTPUT 5V
0.6A MAX)
AC IN
USB
USB cable
(commercially available)
A-type
B-type
PC
/I STANDBY/ON
STANDBY
iPod/USB
5V 2.1A
PURE AUDIO Hi-Bit32
Le voyant central du bouton
AL OUT
COAXIAL OPTICAL COAXIAL
12
DIGITAL IN
DIGITAL IN
ADAPTER PORT
DC OUTPUT
for WIRELESS LAN
USB
(OUTPUT 5V
0.1A MAX)
(OUTPUT 5V
0.6A MAX)
AC IN
USB
Câble USB
(disponible dans le commerce)
Type A
Type B
Ordinateur
/I STANDBY/ON
STANDBY
iPod/USB
5V 2.1A
PURE AUDIO Hi-Bit32
Einschaltanzeige
AL OUT
COAXIAL OPTICAL COAXIAL
12
DIGITAL IN
DIGITAL IN
ADAPTER PORT
DC OUTPUT
for WIRELESS LAN
USB
(OUTPUT 5V
0.1A MAX)
(OUTPUT 5V
0.6A MAX)
AC IN
USB
USB-Kabel
(im Fachhandel erhältlich)
Typ A
Typ B
PC
/I STANDBY/ON
STANDBY
iPod/USB
5V 2.1A
PURE AUDIO Hi-Bit32
Indicatore di alimentazion
AL OUT
COAXIAL OPTICAL COAXIAL
12
DIGITAL IN
DIGITAL IN
ADAPTER PORT
DC OUTPUT
for WIRELESS LAN
USB
(OUTPUT 5V
0.1A MAX)
(OUTPUT 5V
0.6A MAX)
AC IN
USB
Cavo USB (da acquistarsi
separatamente)
Tipo A
Tipo B
PC
N-50_30_Caution_5227_00000_228_0S.fm 11 ページ 2011年9月28日 水曜日 午後12時56分
Vue de la page 0
1 2

Résumé du contenu

Page 1

To first-time usersIn order to familiarize first-time users of this unit with particularly importantfeatures and functions, the following information

Page 2 - Для новых пользователей

Para los nuevos usuariosSe ha preparado un resumen del manual de instrucciones principal con la infor-mación siguiente con el fin de que los nuevos us

Commentaires sur ces manuels

Pas de commentaire