Pioneer PDA-V100HD Instructions d'exploitation télécharger pdf (Page 25)

Additional information 12

English

Sound is distorted. • Replace connection cable.

• Conﬁrm that the input component is set correctly.

Video images from analog

inputs are not displayed

properly.

Video is distorted.

• If distortion occurs in the input component’s video signal (like when performing fast

forward), depending on the video quality, some distortion may appear, or the image

may cease to appear properly.

The same symptoms may also appear depending on the performance of the television.

Also check the following settings on this unit:

• Is the colour system set properly? (See page 19.)

• If INPUT 3 is selected, is the input signal set correctly? (See page 19.)

• Is the colour format set correctly? (See page 20.)

Can’t make settings • See the section Changing settings on page 19.

Remote control unit doesn’t

respond.

• Check remote control unit’s batteries; if depleted, replace with new. (See page 12.)

• If too distant from the receiver, move closer. (See page 13.)

• If an obstacle is located between the remote control unit and the signal receiver,

remove the obstacle. (See page 13.)

• If a bright ﬂuorescent lamp or other light is shining on the remote signal sensor,

remove the light ﬁxture farther away. (See page 13.)

Remote control unit doesn’t

respond (SR connection)

• When using SR connections, point this unit’s remote control at the signal sensor on

the plasma television to operate. When SR connections are not used, operate this

unit’s remote control while pointing it at the signal sensor on PDA-V100HD itself. (See

page 18.)

• The remote control unit will not operate when a control cable is connected to the

CONTROL IN connector. Conﬁrm that a control cable has not been inserted to the

CONTROL IN connector. (See page 18.)

• Conﬁrm that the connector is not connected to the connector of another

manufacturer’s component having the same function. (See page 18.)

Remote control unit doesn’t

respond (PDP combination

mode)

• During PDP combination mode (HDMI CONTROL indicator lights green), INPUT (1

to 6) buttons on this unit’s remote control are not supported. This is not a malfunction.

• When not using PDP combination mode (HDMI CONTROL indicator lights orange or

doesn’t light), the plasma television’s remote control unit cannot be used for

controlling operations.

Power ON indicator flashes

blue

• Try disconnecting the power cord from its power outlet then reconnecting it (do not

repeat this numerous times). If the symptom persists, consult your Pioneer dealer or

service station.

Even after making settings

with the remote control unit,

the corresponding indicators

don’t light.

• Are you attempting to make settings that are not supported?

Perform only those settings that are supported. (See page 19.)

Problem Possible solution

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

Commentaires sur ces manuels

Pas de commentaire

Pioneer PDA-V100HD Instructions d'exploitation Page 25

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel Pioneer PDA-V100HD