Pioneer BR-95 B Manuel d'utilisateur télécharger pdf

The Pioneer TV-CATV remote

control unit controls the CATV

converter as well as the "ON/OFF"

"MUTE" and "VOLUME" functions

of televisions that presently have

remote control.

NOTE: The remote is pre-programmed

to operate the Pioneer converter and

control the volume using the converter.

A. CATV CODE PROGRAM

PROCEDURE

Al. To Program Remote for use with

a TV equipped with remote

control:

1.1 Enter "SET Mode" (See note 1)

Note 1:

To enter the "SET Mode", perform

the following procedure:

Depress 4HP & €Bp simultaneously

until indicator lamp flashes (approximately

3 seconds). If the indicator lamp lights

immediately after pressing the & |

Keys, release the keys and try

again to depress the keys simultaneously.

If the indicator lamp stops flashing after

releasing the keys, depress the above keys

again until lamp flashes.

1.2 Press Key momentarily -

Lamp should stop flashing and stay on.

1.3 Press keys "0", "0", "2", "5" (Indicator

lamp should flash with each key

pressing and blink twice and turn off

after last key press. If indicator lamp

just turns off, the code has not been

entered correctly and the procedure

should be repeated beginning at

StepAl. 1.1.)

1.4 Program TV Code as defined in the

"TV Code Program Procedure"

A2. To Program CATV code for use with a

TV NOT equipped with remote control:

2.1 Enter "SET Mode" (See Note 1)

2.2

2.3

Press i

Key momentarily

Press keys "1", "0", "2", "5" (Indicator

lamp should blink twice and turn off.

If indicator lamp just turns off, the code

has not been entered correctly and the

procedure should be repeated beginning

at Step A2. 2.1.)

2.4 The remote is now ready to control

your CATV converter box.

B. TV CODE PROGRAM PROCEDURE

1.1 ENTER "SET Mode" (See NOTE 1)

1.2 Press the Key momentarily

1.3 Look up appropriate TV and enter the

first code (for instance, for an NEC TV,

depress keys "0", "2", "3" )

1.4 Aim the remote at the TV and depress

the Ml Key. If the TV turns on (or

off) the code is correct and the remote is

ready for use.

The remote is now ready for use.

If the TV does not respond, repeat the

procedure beginning with Step B. 1.1 and enter

the next code for that model TV until the TV

turns on (or off).

If the TV does not respond after all codes

are tried, use the procedure "SCAN TV

PROCEDURE".

SCAN TV PROCEDURE

1.1 Enter “SET Mode” (See Note 1)

1.2 Press jBi Key

BR95A/B

Indicator Lamp

1.3 Press mi SLOWLY and repeat

pressing until TV turns on (or off).

It may require more than 100 key

depressions to find the proper code.

1.4 Press

Key

BATTERIES

Use two (2) AAA batteries

NOTE: If new batteries are replaced

within 2 minutes after the old are

removed, the program should be

retained and reprogramming will not

be required.

BR95C

Indicaior Lump

1 2

Résumé du contenu

Page 1 - Pioneer TV-CATV remote

The Pioneer TV-CATV remote control unit controls the CATV converter as well as the "ON/OFF" "MUTE" and "VOLUME" function

Page 2 - TV Codes TV Codes

TV Codes (TABLE i)TV Codes TV CodesA-MARK................120ANAM...........

Modèles reliés BR-95 A/B | BR-95 A |

Commentaires sur ces manuels

Pas de commentaire

Pioneer BR-95 B Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Contrôle à distance Pioneer BR-95 B. Pioneer BR-95 B User Manual Manuel d'utilisatio

Résumé du contenu

Modèles reliés BR-95 A/B | BR-95 A |

Commentaires sur ces manuels

Produits connexes et manuels pour Contrôle à distance Pioneer BR-95 B