Pioneer DJM-400 Manuel d'utilisateur télécharger pdf (Page 9)

MIXER OPERATIONS (FADER START FUNCTION)

FADER START FUNCTION

By connecting the optional Pioneer DJ CD Player control cable, the

channel fader and cross fader can be used to start CD playback.

When the mixer’s channel fader lever or cross fader lever are moved,

the CD player is released from the pause mode and automatically –

and instantly – begins playback of the selected track. Also, when the

fader lever is returned to its original position, the CD player returns to

its cue point (back cue), thus allowing “sampler” type play.

Cross fader start play and back cue play

When the CD player assigned to channel 1 is set to standby at a cue

point, moving the cross fader lever from the right (2) side toward the

left (1) side, automatically starts play on the channel 1 CD player.

When the cross fader lever reaches the left (1) side, the CD player

assigned to channel 2 goes to back cue (returns to cue point). Also,

when the CD player assigned to channel 2 is set to standby at a cue

point, moving the cross fader lever from the left (1) side to the right

(2) side, automatically starts playback on the channel 2 CD player.

When the cross fader lever reaches the right (2) side, the channel 1

CD player goes to back cue (returns to cue point).

* The back cue is performed even if the input selector switch is not

set to [CD].

[Using the Channel Fader to Start Playback]

1. Set the cross fader selector switch to the left (THRU)

position.

2.Press the FADER START button for the channel (1 to 2)

connected to the CD player you wish to control.

¶ The button for the selected channel lights.

3.Set the channel fader lever to its lowest position.

4.Set the CD player to the desired cue point, and engage cue

point standby.

¶ If a cue point has already been set, it is not necessary to set the

CD player to standby at the cue point.

5. At the instant you wish to start playback, move the

channel fader lever.

¶ CD player begins playback.

¶ After playback has begun, if the channel fader lever is returned

to its minimum position, the CD player returns to the cue point

and reenters standby mode (back cue).

* If the cross fader selector switch is set to a position other than

[THRU], the cross fader control is enabled and channel fader

cannot be used for control.

MIC

HEADPHONES

MASTER

BEAT EFFECTS

FADER

START

(CH-1)

THRU/ /

FADER

START

(CH-2)

[Using the Cross Fader to Start Playback]

1.Set the cross fader selector switch to the middle ( ) or the

right (

) position.

2.Press the FADER START button for the channel (1 to 2)

connected to the CD player you wish to control.

¶ The button for the selected channel lights.

3.Set the cross fader lever fully to the opposite side from the

channel you wish to start.

4.Set the CD player to the desired cue point, and engage cue

point standby.

¶ If a cue point has already been set, it is not necessary to set the

CD player to standby at the cue point.

5.At the instant you wish to start playback, move the cross

fader lever.

¶ CD player begins playback.

¶ After playback has begun, if the cross fader lever is moved fully

to the side opposite from its start, the CD player assigned to the

opposite side channel will return to the cue point and enter

standby mode (back cue).

* If the cross fader selector switch is set to [THRU], channel fader

operation is enabled, and the cross fader cannot be used to

control playback.

MIC

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Pioneer DJM-400 Manuel d'utilisateur Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de musique Pioneer DJM-400